HLINS YA 585 Mono Adjustable Rear Shock Absorber Stx46 Street Instructions
- June 3, 2024
- HLINS
Table of Contents
HLINS YA 585 Mono Adjustable Rear Shock Absorber Stx46 Street Instructions
Note!
Please note that there can be small differences between your product and the images in these instructions.
Note!
Please note that during storage and transport, especially at high ambient
temperature, some of the oil and grease used for assembly may
leak and stain the packaging. This will not cause damage to the product, wipe
off the excessive oil or grease with a cloth.
Note!
Before you install this product, check the kit contents. If anything is missing, please contact an Öhlins dealer.
Warning!
Before you install this product, read the Öhlins Owner’s manual. This product is an important part of the vehicle and the vehicle stability
Shock absorber for Yamaha R7
Mounting Instructions
Warning!
We strongly recommend to let an Öhlins dealer install this product.
Warning!
If you work with a lifted vehicle, make sure that it is safely supported to prevent it from tipping over
Note!
When you work with this product, see the vehicle service manual for vehicle specific procedures and important data.
Note!
Before you install this product clean the vehicle.
1
Put the motorcycle on a work stand so that the rear wheel barely touches the
ground.
2
Remove the chain/rear wheel cover.
3
Remove the lower attachment screw for the original shock absorber.
4
Remove the front shock absorber attachment screw.
5
Remove the original shock absorber.
6
Install the Öhlins shock absorber with the cylinder head gas valve upwards.
7
Install the front and rear shock absorber attachment screws.
Note!
Lower the vehicle so that the suspension is slightly compressed before you tighten the screws.
Caution!
Make sure that you tighten all screws to the correct torque and that nothing fouls or restricts movement of the shock absorber/front fork/steering damper when the suspension is fully compressed or extended.
ADJUSTMENTS
Warning!
Before you ride/drive, always make sure that the setup is according to the recommended setup data. Read about adjustments and setting up in the Öhlins Owner’s Manual before you make any adjustments. Contact an Öhlins dealer if you have any questions about setting up.
SETUP DATA
Öhlins products are subject to continuous improvement and development, therefore, although these instructions include the most up-to-date information available at the time of printing, minor updates may occur.
To find the latest information contact an Öhlins distributor. Please contact Öhlins if you have any questions regarding the contents in this document.
© Öhlins Racing AB. All rights reserved. Any reprinting or unauthorized use without the written permission of Öhlins Racing AB is prohibited.
Öhlins Racing AB
Box 722
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80