Danby DDR060BMPWDB 60 Pint Dehumidifier Owner’s Manual
- June 14, 2024
- Danby
Table of Contents
- Danby DDR060BMPWDB 60 Pint Dehumidifier
- GROUNDING INSTRUCTIONS
- OPERATING INSTRUCTIONS
- FEATURES
- TIMER
- WATER REMOVAL
- CARE & MAINTENANCE
- CLEANING
- FREQUENTLY ASKED QUESTIONS
- TROUBLESHOOTING
- LIMITED “CARRY IN” WARRANTY
- GENERAL PROVISIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Danby DDR060BMPWDB 60 Pint Dehumidifier
Welcome to the Danby family. We are proud of our quality products and we believe in dependable service. We suggest that you read this owner’s manual before plugging in your new appliance as it contains important operation information, safety information, troubleshooting, and maintenance tips to ensure the reliability and longevity of your appliance. You are entitled to the warranty coverage as described in the owner’s manual provided with your new appliance.
- Please write down your appliance information below. You must keep the original proof of purchase receipt to validate and receive warranty services.
- Register your product online and receive a FREE 2-MONTH WARRANTY EXTENSION after filling out a product survey, at www.danby.com/support/product-registration/
Need Help?
- Read your Owner’s Manual for installation help, troubleshooting, and maintenance assistance.
- Visit www.Danby.com to access self-service tools, FAQs, and much more by searching your model number in the search bar.
- For the Quickest Customer Service, please fill out the web form at www.danby.com/support.
- Your submission will go directly to an expert on your particular appliance. Our average response times are between 20 minutes and 2 hours, during EST business hours.
- Call 1-800-263-2629 – please note that during peak hours, hold times can exceed one hour.
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAFETY REQUIREMENTS
This appliance is not intended for use by persons (including children) whose
physical, sensory, or mental capabilities may be different or reduced, or who
lack unless such Persons receive superv1s1on or training to operate the
appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
- To avoid the risk of electric shock, do not operate this dehumidifier in an area that is likely to accumulate standing water. If this condition develops,s, disconnect the power supply before stepping into the water.
- Do not store or use combustible materials such as gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
- Do not insert fingers or other objects into grills or openings in the appliance.
- Do not cover or block the intake and exhaust openings.
- Do not operate the appliance without the filter installed.
- Do not operate the appliance near heat sources.
- This appliance is intended for indoor, and residential applications only. Do not use this dehumidifier outdoors. Do not use this dehumidifier for commercial or industrial applications.
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding reduces the risk of electrical
shock by providing an escape wire for the electrical current. This apPliance
has a cord that has a grounding wire with a 3-prong plug. The power cord must
be plugged into an outlet that is properly grounded. It is a 2-prong wall
outlet 1t must be replaced with a properly grounded 3-prong wall outlet. The
serial rating plate indicates the voltage and frequency the appliance is
designed for.
WARNING – Improper use of the grounding plug can result in a risk of
electric shock. Consult a qualified electrician or service agent if the
grounding instructions are not completely understood, or 1f doubt exists as to
the appliance is properly grounded. Do not connect the appliance to extension
cords, adapters, or together with another appliance in the same wall outlet.
Do not splice the power cord. Do not under any circumstances cut or remove the
third ground prong from the power cord. If the power supply cord is damaged,
it must be replaced by the manufacturer, its service agent, or similarly
qualified person to avoid lizard.
OPERATING INSTRUCTIONS
FEATURES
- Air Outlet
- Control Panel
- Handles (both sides)
- Water Bucket
- Air Inlet
- Continuous Drain Outlet
- Power Cord Storage Strap
- Power Cord Storage Band
- Pump Drain Outlet
- Power Cord
CONTROL PANEL
- Continuous button: Press to activate the continuous dehumidifying operation.
- Timer button: Press to set the timer.
- Auto defrost light: The light will illuminate when frost builds up on the evaporator coils. The compressor will cycle off and the fan will continue to run until the frost melts.
- Bucket full light: The light will illuminate when the bucket is lulled or incorrectly positioned inside the cabinet. The compressor and fan operation will stop as a safety feature. When the bucket is emptied or correctly re-positioned the dehumidifier will resume operation automatically.
- Display and humidity adjust buttons:
- Shows the actual (± 5% accuracy) room humidity level in a range of 30% to 90%. Otherwise, displays selection when programming humidity or timer.
- The humidity level can be set within a range of 35% to 85% relative humidity in 5% increments. For drier air, set to a lower percentage value. For more damp air, set a higher percentage value.
- Power button: Press to turn the dehumidifier on or off.
- Pump button: Press to activate the drain pump. Ensure that a drain hose is connected before starting the pump.
- Smart dehumidifier: This function will automatically adjust the humidity level with the fluctuating room temperatures. The humidif};’ level cannot be adjusted in this setting, it will stabilize between 45% – 55%.
- Filter button: The check filter light will illuminate after 250 hours of operation. After cleaning the filter, press the filter button to turn off the lights.
- Fan button: Press to select normal or high fan speed. The light will illuminate when set to high fan speed.
OPERATING INSTRUCTIONS OPERATION
- Place the dehumidifier on a smooth, level floor that is strong enough to support the appliance with a full bucket of water.
- Do not Place the dehumidifier on carpeting as this can block airflow around the appliance. Do not force casters to move over carPeting as the appliance can become unbalanced and spill water.
- To maintain efficiency, operate the appliance in an enclosed area. Keep nearby doors and windows dosed.
- Maintain a minimum clearance of 40 cm ( 16 inches) around the air outlets and 20 cm (8 inches) on the other sides of the appliance to allow for proper air circulation.
- The recommended ambient operating °temerature is between 5 C (41 ° F) and 32°C (90 r.F).
- Any time the appliance is placed on its back or side, it must be allowed to stand upright for 6 hours before plugging in to avoid damage to internal components.
- The default setting is 40% and has high fan speed. Depending on conditions the dehumidifier may not start automatically under the default setting.
- This means the ambient humidity is less than 40%. Press the humidity adjust buttons to lower the set humidity until it is lower than the ambient humidity.
- For performance, ensure that the humidity setting is 10% lower than the ambient humidity. It is normal for the ambient humidity to vary up to 5% above or below the set humidity.
- It is recommended in normal conditions to set the humidity between 40-45%.
- It is normal for the dehumidifier to exhaust warm air from the air outlet.
TIMER
Auto Off
- When the dehumidifier is turned on, press the timer button to activate the auto-off timer.
- Press the humidity to adjust buttons to change the set time in 0.5-hour increments up to 10 hours and then in 1-hour increments up to 24 hours.
Auto On
- When the dehumidifier is turned off, press the timer button to activate the auto-on timer.
- Press the humidity adjust buttons to change the set time in 0.5-hour increments up to 10 hours and then in 1-hour increments up to 24 hours.
- Using Auto On and Auto Off Together The auto on and auto off timers can be used at the same time by first setting one and then the other.
- For example, if the dehumidifier is running, you can set the auto-off timer to let it run for a set amount of time before turning off and then set the auto on timer to turn it back on at a later time. Or, if the dehumidifier is not running, you can set the auto-on timer to turn it on at a later time and then set the auto-off timer to shut it off after running for some time.
Note : The timer will not cycle the dehumidifier on and off indefinitely.
The auto-on and auto-off timers will function for one hme and then the
dehumidifier will return to regular functioning. Turnin8 the dehumidifier on
or off at any time or
changing the timer setting to 0.0 will cancel the timer settings.
WATER REMOVAL
There are three ways to remove collected water from the appliance.
Water Bucket
The dehumidifier will automatically collect condensed water in the water
bucket. When the bucket is full, the compressor and fan will turn off and the
full bucket indicator light will turn on. The display will show “P2”. To empty
the bucket, gently remove it from the appliance by gripping both sides and
pulling outward. Be cautious when removing the bucket, it will be full and can
be heavy. Do not place the water bucket directly on the floor. The bottom of
the bucket is uneven and it will fall over and spill water. Empty the bucket
and replace it in the appliance. The dehumidifier will not function without
the bucket installed. Never tamper with or attempt to defeat the water level
float system. Proper installation of the water bucket is crucial in
maintaining reliable operation.
Note: When removing the bucket, the pump arm for the drain pump may fall
down. It must be gently pushed upward back into the correct position before
replacing the bucket.
Continuous Drain
Water can be removed using the continuous drain with a standard garden hose
and female threaded end (not provided). Before using any automatic drain
functions, check that c:ill drain ports are clean. There is one drain port
inside the bucket compartment of the appliance, remove the bucket to see it.
There is one drain port on the back of the appliance where the female threaded
end and garden hose attach. All drain ports should be cleaned with a pipe
cleaner prior to use. To use the continuous drain you must P,Urchase a garden
hose and female threaded end.
The required dimensions are
- • Female threaded end: ID:M= 1″
• Garden hose: ID?<D5/16″
Remove the cover from the continuous drain outlet and attach the female threaded end and the garden hose to the back of the appliance. Direct the other end of the garden hose to a bucket or floor drain. Ensure that the garden hose is not bent and goes straight down from the back of the appliance. The continuous drain is only activated by gravity so any bends or upward motion in the hose will stop the water from draining. The garden hose should be cut so that it is no more than 1 .8 m (6 feet) long. If the drain hose is too long water may not drain completely which can leaa to stagnant water and mirdew build-up inside the hose.
Notes
- Do not clean the drain ports with anything more rigid than a pipe cleaner as this can damage the appliance.
- If the drain ports are clogged or dirty it can cause water to leak from the bottom of the appliance.
- There is no drain pump in this appliance. The continuous drain Is fed by gravity alone.
WATER REMOVAL
Pump Drain
If the continuous drain is inconvenient, water can be removed from the
appliance using the pump drain. When using the pump,, the appliance will first
fill the bucket with water and then the pump arm will pump water from the
bucket through the drain and out the hose. Remove the continuous drain hose
from the unit and rotate back Plastic cover to the continuous drain hose
outlet clockwise. Peel off the fixed tape, insert the pump drain hose into the
pump drain hose outlet for depth of 15 mm at least and make sure the hose is
secure so there are no leaks. Direct the other end of the hose to a drain.
Press the PUmp buttons to activate the pump function. When the bucket is full,
the pump will begin to work. Ensure that the drain hose is not bent this can
stop the water from draining correctly and, overworking pump.
Do not connect the provided hose together with another hose. The maximum length of the P.Ump drain be no more tnan 4.6 m ( 15 leet). If the dram hose 1s too long water may not drain completely which can lead to stagnant water and mildew build up inside the hose. When using the pump drain, the water bucket should be emptied every few days to ensure that the water in the bucket does not become stagnant or grow mildew. To remove the hose, P,ress inward on the ring around the drain and pull the hose outward.
Important: If the drain pump is activated, water will exit the drain
whether a hose is attached or not. Ensure that the drain pumP, is deactivated
when the hose is removed to avoid damage to floor due to leaking water.
To remove the drain hose press inward on the ring around the drain and pull
the hose outward.
CARE & MAINTENANCE
AIR FILTER
The air filter should be cleaned approximately every 2 weeks. The air filter
may require more frequent cl?aning if there is significant aander or fur in
the air. AP, approximately every two weeks, the filter indicator ligfo on the
control panel will illuminate as a reminder to clean t?e filter. Follow the
steps below to clean the filter and return the appliance to normal
functioning.
- The air filter is located behind the rear intake grill. To remove the air filter, grasp the filter tab on the bottom of the grill and slide it downward.
- Use a vacuum cleaner with a soft brush attachment to remove any large debris or dust build up from the air filter.
- Wash the filter in lukewarm, soapy water, below 40°( (104° F), or use a neutral cleaning agent. Rinse the filter with clean water and dry thoroughly before reinstalling in the appliance.
- Press the filter button on the control panel to resume normal functioning.
Note : Do not operate the appliance without the air filter installed.
ERROR CODES
If the display panel shows anx of the below error codes, unplug the appliance{
let it stand for 5-10 minutes and then plug it back in. If the error persists,
call for service.
- AS – Humidity sensor error
- ES – Temperature sensor error
- P2 – Full bucket
- Eb – bucket removed or not in correct position
CLEANING
To avoid possible electric shock, ensure that the applifence is unplugged before performing any cleaning or maintenance. The outside of the appliance can be wiped clean with a soft cloth or with a lukewarm, damp cloth if necessary.Do not use gasoline benzene, thinner or any other chemicals to dean this appliance as these substances can cause damage to the finish and deformation of plastic parts. Never pour water directly onto the appliance as this will cause deterioration of electrical components and wiring insulation. Ensure that the drain ports on the interior of the appliance and the drain ports on the back of the appliance are free of dirt and calcium buildup.
END OF SEASON CARE
Unplug the dehumidifier and ensure the filter is clean. ensure the bucket is
empty, and then allow both the bucket and the dehumidifier to dry completely
before storing for the off-season. It could take a few days for water inside
the dehumidifier to completely evaporate. You can speed up this process by
wiping the bucket with a dry cloth and ensuring the lower drain of the
dehumidifier has been emptied. Store the dehumidifier covered in a dry
location.
DISPOSAL
This appliance may not be treated as regular household waste, 1t should be
taken to tlie appropriate waste collection POint for recycling of electrical
components. Check for local regulatory compliance regarding approved and state
disposal
of this appliance.
FREQUENTLY ASKED QUESTIONS
What is the best humidity setting?
We recommend setting your dehumidifier between 40-45%.
Is the air that comes out of the dehumidifier supposed to be hot?
Yes, usually this air feels warm.
Why isn’t the dehumidifier collecting any water?
There may not be enough humidity in your environment or the relative humidity
might be set higher than ambient humidity.
Does the fan run continuously?
In continuous mode, the fan will run continuously. In smart dehumidify mode or
manual mode the fan will cycle on and off.
Can I use an extension cord?
No, the dehumidifier is built to operate using the power cord provided.
Does the timer cycle on and off forever?
The on and off timers can be used at the same time however, they will only
cycle one time and then resume normal functioning.
How do I hook up my direct drain?
To use the continuous drain you must purchase a garden hose and female
threaded end.
The dimensions required are:
- female threaded end: ID:M= 1″
- garden hose: ID?(f.)5/16″.
Remove the cover from the continuous drain outlet and attach the female threaded end and the garden hose to the back of the appliance. Direct the other end of the garden hose to a bucket or floor drain.
Does the filter light come on when it is dirty?
The filter light comes on automatically after about 250 hours of use even if
the filter is clean. Clean the filter and then press the filter button to turn
the filter light off.
TROUBLESHOOTING
The appliance will not operate
- Plug is not fully inserted into the wall ourlet
- Blown fuse or circuit breaker
- Ambient humidity is lower than the set humidity
- Bucket is full or is not in the proper position
Insufficient dehumidifying
- Air filter is dirty
- Blocked airflow
- Appliance size is too small for the application
- Ambient humidity is lower than the set humidity
Noise
- Air filter is dirty
- Bucket is not in proper position
- Floor surface is not level
Odors
- Formation of mold or mildew on internal wet surfaces
- Place an algaecide tablet in the water bucket
Water on floor
- Hose connection is loose
- Drain cover has been removed
Frost build-up
- When ambient temperature is below 5°C (41 ° F) frost may form
- Switch the appliance to fan-only mode until the frost melts
LIMITED “CARRY IN” WARRANTY
This quality product is warranted to be free from the manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer. This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter “Danby”) or by an authorized distributor of Danby, and is non-transferable.
TERMS OF WARRANTY
Plastic parts are warranted for thirty (30) days from the date of purchase,
with no extensions provided. Plastic parts are warranted for thirty (30) days
from the date of purchase, with no extensions provided. First 24 months During
the first twenty-four (24) months, any functional parts of this product found
to be defective, will be repaired or replaced, at the warrantor’s option, at
no charge to the original purchaser.
To obtain service Contact the dealer where the unit was purchased, or contact
the nearest authorized Danby service depot, where service must be performed by
a qualified service technician. If service is performed on the unit by anyone
other
than an authorized service depot, all obligations of Danby under this warranty
shall be void. It is the responsibility of the purchaser to transport the
appliance to the nearest authorized service depot. Transportation charges to
and from the service location are not protected by this warranty and are the
responsibility of the purchaser. Nothing within this warranty shall imply that
Danby will be responsible or liable for any spoilage or damage to food or
other contents of this appliance, whether due to any defect of the appliance,
or its use, whether proper or improper.
EXCLUSIONS
Save as herein provided, by Danby, there are no other warranties, conditions,
representations or guarantees, express or implied, made or intended by Danby
or its authorized distributors and all other warranties, conditions,
representations or guarantees, including any warranties, conditions,
representations or guarantees under any Sale of Goods Act or like legislation
or statute is hereby expressly excluded. Save as herein provided, Danby shall
not be responsible for any damages to persons or property, including the unit
itself, howsoever caused or any consequential damages arising from the
malfunction of the unit and by the purchase of the unit, the purchaser does
hereby agree to indemnify and hold harmless Danby from any claim for damages
to persons or property caused by the unit.
GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:
- Power failure.
- Damage in transit or when moving the appliance.
- Improper power supply such as low voltage, defective house wiring, or inadequate fuses.
- Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions (ie. extremely high or low room temperature).
- Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
- Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods, etc.
- Service calls result in customer education.
- Improper Installation (ie. Building-in of a free-standing appliance or using an appliance outdoors that is not approved for outdoor application, including but not limited to garages, patios, porches or anywhere that is not properly insulated or climate controlled).
- Proof of purchase date will be required for warranty claims; retain bills of sale. If warranty service is required, present the proof of purchase to our authorized service depot.
Danby Products Limited
PO Box 1778, Guelph, Ontario, Canada N l H 6Z9
Telephone (5191 837 0920 FAX (519) 837 0449
Warranty Service
Carry-In l -800-263-2629
04/17 Danby Products Inc.
PO Box 669, Findlay, Ohio, U.SA 45840
Telephone (419) 4258627 FAX (419) 4258629
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>