DENON AVR-X4300H Integrated Network AV Receiver User Guide

DENON AVR-X4300H Integrated Network AV Receiver

Product Information

Specifications

• Product Name: AVR-X4300H
• Type: Integrated Network AV Receiver
• Power Outlet: AC 120 V, 60 Hz

What’s In the Box

• Quick Start Guide
• FM indoor antenna
• Safety Instructions
• AM loop antenna
• Notes on radio
• Warranty (for North America model only)
• Cable labels
• Sound calibration microphone
• Sound calibration microphone stand
• Remote control unit
• Receiver Power cord
• R6P/AA batteries
• External antennas for Bluetooth/ wireless connectivity

Important: External Antennas
The removable external antennas are required for both Bluetooth and Wireless network connectivity. Please make sure to connect the antennas before attempting to use the Bluetooth or Wi-Fi features of the AVR-X4300H.

Connecting the external antennas for Bluetooth/Wireless connectivity

1. Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
2. Turn the antenna clockwise until it is fully connected. Do not over-tighten.
3. Rotate the antenna upwards for the best possible reception.

Product Usage Instructions

Setup
There are three steps to the setup process:

1. Installing batteries in the remote control unit
2. Connecting the receiver
3. Following the On-Screen Setup Assistant

Installing batteries in the remote control unit

1. Open the battery compartment on the back of the remote control unit.
2. Insert the provided R6P/AA batteries into the compartment, following the polarity markings (+/-).
3. Close the battery compartment.

Connecting the receiver

Place the receiver near your TV and connect the power cord:

• Connect one end of the power cord to the receiver.
• Connect the other end of the power cord to a household power outlet (AC 120 V, 60 Hz).

Connect the receiver to your home network:

• Wired LAN: Connect an Ethernet cable (not included) between your receiver and your network router.
• Wireless LAN: When connecting to wireless LAN (Wi-Fi), follow the instructions in “Connecting the external antennas for Bluetooth/Wireless connectivity” and connect the antennas.

Connect the receiver to your TV with an HDMI cable:

• Connect one end of the HDMI cable to the HDMI OUT MONITOR1 (ARC) port on the receiver.
• Connect the other end of the HDMI cable to an HDMI IN (ARC) port on your TV.

Note: ARC (Audio Return Channel): If your TV supports ARC, your TV can send audio back to the AV receiver when you are using your TV’s built-in video sources (TV tuner, Smart TV streaming services, etc…). ARC requires that you enable HDMI CEC on your TV. Please refer to your TV’s Owner’s Manual for instructions on how to setup HDMI CEC. Note that some TV manufacturers use other names for the HDMI CEC function.

FAQ

Q: Where can I find AVR setup tips online?
A: You can find AVR setup tips online at usa.denon.com/SetupTips or ca.denon.com/SetupTips.

Q: How can I get assistance?
A: You can call for assistance at 1-855-MY.DENON (USA), 1-855-693-3666, or 1-800-668-0652 (Canada).

Welcome
Thank you for choosing a Denon AV receiver. This guide provides step-by-step instructions for setting up your AV receiver.

Before You Begin

• When connecting this unit to a device that is compatible with the Deep Color, 4K and ARC functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
• These drawings are for illustrative purposes only and may not represent the actual product(s).

What’s In the Box

The included sound calibration microphone stand is convenient for use when performing Speaker Calibration. Using your own tripod or the supplied Sound calibration microphone stand enables settings to be automatically configured to the optimum listening environment, providing exceptionally high performance.

Important: External Antennas

The removable external antennas are required for both Bluetooth and Wireless network connectivity. Please make sure to connect the antennas before attempting to use the Bluetooth or Wi-Fi features of the AVR-X4300H.

Connecting the external antennas for Bluetooth/Wireless connectivity

For each of the two antennas:

1. Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
2. Turn the antenna clockwise until it is fully connected. Do not over-tighten.
3. Rotate the antenna upwards for the best possible reception.

Setup

There are three steps to the setup process.

1. Installing batteries in the remote control unit
2. 2 Connecting the receiver
3. 3 Following the On-Screen Setup Assistant

Installing batteries in the remote control unit

Connecting the receiver

1. Place the receiver near your TV and connect the power cord

2. Connect the receiver to your home network
   

3. Wired LAN
   Connect an Ethernet cable (not included) between your receiver and your network router.

4. Wireless LAN
   When connecting to a wireless LAN (Wi-Fi), follow the instructions in “Connecting the external antennas for Bluetooth/Wireless connectivity” and connect the antennas.

5. Connect the receiver to your TV with an HDMI cable ARC (Audio Return Channel) :
   If your TV supports ARC, your TV can send audio back to the AV receiver when you are using your TV’s built-in video sources (TV tuner, Smart TV streaming services, etc…) ARC requires that you enable HDMI CEC on your TV. Please refer to your TV’s Owner’s Manual for instructions on how to set up HDMI CEC. Note that some TV manufacturers use other names for the HDMI CEC function.

6. Turn on the TV

7. Select the appropriate HDMI input on your TV

8. Turn on the receiver
   Press to turn on the receiver.

9. Verify the connection
   Verify that you can see this screen on your TV. If this screen is not displayed, please go back and retry the steps again in the recommended sequence.

Following the On-Screen Setup Assistant

The Setup Assistant will walk you through connecting and configuring your speakers and components to your Denon receiver. Please use the remote control and follow the on-screen instructions.

Owner’s Manual

• For more information, visit www.denon.com
• Refer to the Online Manual for other function information and operation procedure details. manuals.denon.com/AVRX4300H/NA/EN/

All New “Denon 2016 AVR Remote” App
The “Denon 2016 AVR Remote” App allows you to remotely control your Denon receiver wirelessly from your iOS, Android, or Kindle mobile devices. Please visit the Apple App Store, Google Play, or the Amazon Appstore and search for “Denon 2016 AVR Remote” to get your free copy.

This unit is part of the HEOS wireless multi-room sound system that enables you to enjoy your favorite music anywhere and everywhere around your home. By utilizing your existing home network and the HEOS App on your iOS, Android or Kindle mobile devices, you can explore, browse, and play music from your own music library or from many online streaming music services.

• True multi-room audio – play different songs in different rooms or the same song in every room
• Industry-leading microsecond audio synchronization between HEOS device

Getting the “HEOS“ App
Please visit the Apple App Store, Google Play, or the Amazon App Store and search for “HEOS” to get your free copy.

www.denon.com
Printed in Vietnam 5411 11387 00AD Copyright © 2016 D&M Holdings Inc. All Rights Reserved.

References

• Manual-Hub.com - Free PDF manuals!
• AVR-X4300H
• Denon™ Home Theater | Enhance the Entertainment Experience

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>