OtterBox Galaxy S23+ Defender Series Case Smart Phone User Guide
- June 14, 2024
- OtterBox
Table of Contents
OtterBox Galaxy S23+ Defender Series Case Smart Phone
Product Information
Specifications
- Product Name : Defender Series
- Compatible Devices : Varies by model
- Material : Silicone slipcover and hard plastic shell
- Color : Varies by model
Product Usage Instructions
-
Step 1: Remove Case from Holster (if applicable)
To begin the installation process, remove the case from the holster, if your product includes a holster. -
Step 2: Remove the Outer Slipcover
Peel away and remove the outer slipcover to reveal the shell. The shell consists of two separate pieces. -
Step 3: Separate the Shell
Locate the arrows on the back of the shell. These arrows may vary depending on your device. Release the corresponding snaps on the sides of the shell to separate it into two pieces. -
Step 4: Place the Device into the Bottom Half of the Shell
Insert your device into the bottom half of the shell, ensuring it fits securely. -
Step 5: Snap the Two Pieces Together
Take the top half of the shell and place it on the device. Snap the two pieces together along all edges to securely enclose your device. -
Step 6: Wrap the Slipcover Around the Shell
Wrap the slipcover around the shell, ensuring that the silicone slipcover is properly nested in the groove and notches on all sides. This will provide a tight and secure fit for your device.
Frequently Asked Questions (FAQ)
How do I remove the case from my device?
To remove the case, simply reverse the installation process. Separate the two
shell pieces by releasing the snaps, then gently remove your device from the
bottom half of the shell.
Can I wash the slipcover?
Yes, the slipcover can be washed. We recommend using mild soap and water to
clean it. Allow it to air dry completely before reattaching it to the shell.
Is the Defender Series compatible with wireless charging?
The compatibility with wireless charging may vary depending on your device
model. Please refer to your device’s user manual or contact our customer
support for more information.
INSTRUCTIONS
-
Remove the case from the holster (if applicable).
-
Peel away and remove the outer slipcover.
-
The shell separates into two pieces. To separate, find the arrows* on the shell back and release the corresponding snaps on the shell’s side.
Arrow locations may vary by device -
Place the device into the bottom half of the shell.
-
Place the shell’s top half on the device and snap the two pieces together along all edges.
-
Wrap the slipcover around the shell. Ensure silicone slipcover is nested in groove and notches on all sides for a tight, secure fit.