OtterBOX 20230612 Standard Power Bank User Guide
- June 12, 2024
- OtterBox
Table of Contents
POWER BANK
Quick Start Guide
Fully charge for first use
While charging display continually shows (Fig. 1):
- 1 flashing LED – < 25% capacity
- 1 solid LED, 1 flashing LED – 25-50% capacity
- 2 solid LEDs, 1 flashing LED – 50-75% capacity
- 3 solid LEDs, 1 flashing LED – 75-99% capacity
- 4 solid LEDs – 100% capacity
When not charging, press button to view capacity (Fig. 2):
- No LEDs – 0% capacity
- 1 flashing LED – 0-10% capacity
- 1 solid LED – 10-25% capacity
- 2 solid LEDs – 25-50% capacity
- 3 solid LEDs – 50-75% capacity
- 4 solid LEDs – 75-100% capacity
WIRELESSLY CHARGE DEVICES (If applicable)
Press button and place your device flat on the side of the Power bank
featuring the OtterBox logo.
An orange light blinks while detecting your device and stops blinking if the
device is not detected.
The orange light blinks when a device is connected and charging.
CHARGE DEVICES
Power bank automatically starts charging most devices.
Care & Maintenance
Cleaning
- Wipe with a dry cloth.
- Do not use solvents, chemicals, cleaning solutions, alcohol, ammonia or abrasives.
CUSTOMER SERVICE
1-855-688-7269
USA + Canada – Toll Free
support@otterbox.com
otterbox.com/support
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
©2023 Otter Products, LLC. All rights reserved. The OtterBox name and OtterBox
trademarks are the property of Otter Products, LLC, registered in the U.S. and
other countries. All other trademarks are the property of their respective
owners.
Otter Products LLC
TR2305006-001, Rev 1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>