XLR Security RG-RAP2260 High Density Multi G Ceiling Access Point User Manual
- June 28, 2024
- XLR Security
Table of Contents
XLR Security RG-RAP2260 High Density Multi G Ceiling Access Point
Product Overview
The RG-RAP2260 is a dual-radio ceiling-mounted wireless access point (AP) with one 2.SGE port, delivering an access rate of up to 3000 Mbps per device. The AP is designed by Ruijie Networks for indoor Wi-Fi coverage scenarios within medium- and large-sized areas. RG-RAP2260 adopts either 802.3at standard PoE power supply or local 12 V DC adapter power supply. Compliant with IEEE 802.11a/b/g/n/ac/ax, the device can simultaneously work in the 2.4 GHz and 5 GHz bands. RG-RAP2260 also supports dual-stream MU-MIMO and provides an access rate of up to 57 4 Mbps at 2.4 GHz and 2402 Mbps at 5 GHz with a high throughput of up to 2976 Mbps per device. The AP provides one 2.SGE port and one GE port, making it possible to connect a camera or an Ethernet switch for varied service networking needs.
Package Contents
Package Contents (The Ethernet cables are customer-supplied.)
| Item | Quantity |
|---|---|
| Access Point | 1 |
| Mounting Bracket | 1 |
| Phillips Pan Head Screw | 2 |
| Wall Anchor | 2 |
| User Manual | 1 |
| Warranty Card | 1 |
| Alignment Sticker | 1 |
Product Appearance
Front Panel
Rear Panel
- Reset Button
- LAN2 Port
- LAN1/2.5G/PoE Port
- 12 V DC Input Plug
Caution:
- Please use the DC power adapter with specifications (12 V/2 A) recommended by Ruijie. The power adapter is customer-supplied.
- If the AP adopts PoE power supply, connect the LAN1/2.5G/PoE port on the AP to the PoE-capable port on a switch or a PoE device with an Ethernet cable. Make sure that the device connected is compliant with IEEE 802.3at.
Hardware Specifications
| Specifications | Description |
|---|
Dimensions
(W X DX H)
| 194 mm x 194 mm x 45.1 mm (7.64 in. x 7.64 in. x 1.78
in.) (excluding brackets)
Max Throughput| 2.4 GHz: up to 574 Mbps
5 GHz: up to 2402 Mbps Up to 2.976 Gbps per AP
Operating Bands
| 802.11b/g/n/ax: 2.4 GHz to 2.4835 GHz
802.11a/n/ac/ax: 5.150 GHz to 5.350 GHz, 5.470 GHz to
5.725 GHz, 5.725 GHz to 5.850 GHz
Antenna| Built-in omnidirectional antenna
Service Ports| One 10/100/2500M BASE-T Ethernet port (PoE-capable)
One 10/100/1000M BASE-T Ethernet port
Restart/Restore
Factory Settings
| Support
LED| One LED (blue)
Power Supply| Adapter: DC 12 V/2 A (optional) Caution:
The power adapter is an optional accessory with the inner diameter of 2.1 mm (0.08 in.), the outer diameter of 5.5 mm (0.22 in.) and the depth of 10 mm (0.39 in.).
PoE: IEEE 802.3at-compliant
Max Power
Consumption
| 18W
Temperature| Operating temperature: 0°C to 40°C (32°F to 104°F)
Storage temperature: -40°C to 70°C (-40°F to 158°F)
Humidity| Operating humidity: 5% to 95% RH (non-condensing)
Storage humidity: 5% to 95% RH (non-condensing)
Weight| :5 0.65 kg (1.43 lbs, excluding brackets)
Color| Warm White
Tools (Customer-supplied)
Mounting the AP
-
Secure the mounting bracket on the ceiling or wall with the provided screws. The center-to-center distance between the two holes is 53 mm (2.09 in.). Figure 1-1 Securing the Mounting Bracket on the Ceiling/Wall
-
Connect the Ethernet cable to the LAN port on the rear panel of the AP (The LAN1/2.5G/PoE port is PoE-capable).
Figure 1-2 Connecting the Ethernet Cable to the LAN Port -
Align the square feet on the rear of the AP to the mounting holes on the bracket. Slide the AP into the holes until it clicks into place.
Figure 1-3 Securing the AP on the Mounting Bracket
LED and Button
| Item | Status | Description |
|---|
LED
| Solid blue| The AP is operating normally. No alarm occurs.
Off| The AP is NOT receiving power.
Fast flashing| The device is starting up.
Slow flashing (at
0.5 Hz):
| The network is unreachable.
Flashing twice in succession| 1. The AP is restoring the factory settings.
2. The AP is upgrading the software. Caution:
In this case, please do not power off the device.
One long flash
followed by three short flashes.
|
Other faults occur.
Reset Button
| Press for less than
2s
| The device is restarting.
Press for 2s to 5s| The device does not respond.
Press for more
than 5s
| The device restores to the factory settings.
Network Configuration
Method 1 (Recommended)
Scan the QR code in the manual or on the device to download the Ruijie
ReyeeApp. Perform the intelligent networking and complete the network
configuration based on the instructions on the App.
Method 2
Connect the device to the SSID (If multiple devices exist in the network, use
the SSID @Ruijie-mxxxx by default. If only one device exists in the network,
use the SSID @Ruijie-sxxxx.). You can also connect the PC to the LAN port of
the device with an Ethernet cable and visit http://10.44.77.253 by
browser for network configuration. The default password is admin. You are
advised to configure the IP address of the PC as 10.44.77.250.