VARILIGHT UKES V-Pro Smart Primed 2 Gang WiFi Switched Socket Instructions

VARILIGHT UKES V-Pro Smart Primed 2 Gang WiFi Switched Socket

Specifications

• Power Connection: Distribution board
• Cable Rating: Correct rating and type
• Earth Terminal: Yes, with green and yellow sleeving
• App Compatibility: Android and Apple devices

Power Connection

1. Disconnect power from the distribution board.
2. Install the socket.
3. Use a cable of the correct rating and type.
4. Check the terminal connections layout before wiring.
5. Make electrical connections according to the relevant diagram with no bare wires protruding.
6. If an earth terminal is present, connect the fixed earth wire and then connect a short length of wire to the earth terminal on the wall box.
7. Reconnect power from the distribution board.

Using the App

Android Devices

1. Create an account for the Supla App to control the socket from your mobile device.
2. Download the Supla App from Google Play Store.
3. Create an account, check email for confirmation, and reload the app on your device.
4. In the app settings, switch off any mobile data connection.
5. Add I/O Device and follow the procedure to install the socket successfully.
6. Customize socket and location names for easy identification.

Apple Devices

1. Create an account for the Supla App to control the socket from your mobile device.
2. Download the Supla App from the App Store.
3. Create an account, check email for confirmation, and follow the provided web link.
4. In the app, add I/O Device and follow the procedure.
5. To configure the socket, press the socket button for at least 10 seconds until the blue light blinks quickly.
6. In system settings, change the network on your mobile device to

Simply Connect to the Power

1. Disconnect power from the distribution board.
2. Install Socket.
3. Always use cable of the correct rating and type.
4. The layout of the terminals may differ between fittings so check the location of terminal connections carefully before wiring.
5. Make electrical connections according to the relevant diagram ensuring no bare wires protrude from the terminals.
6. If the product has an earth terminal connect the fixed earth wire to it and then connect a short length of wire from the earth terminal on the product to the earth terminal on the wall box. The earth wire should be sheathed with green and yellow sleeving.
7. Reconnect power from the distribution board.

Simply Connect to the App

Android Devices

1. The next step is to create an account for the Supla App that will be used to control the socket from your mobile device.
   For Android devices, scan the QR code or search the Google Play Store and download the Supla App from on your chosen mobile device.
   Click on “Settings” and “Create an account” and after creating login details an email should have been sent to your selected email address. If the email doesn’t appear then please also check your junk/spam folder.

2. Reload the app on your mobile device and in the settings of your device switch off any mobile data connection.

3. Click the 3‐line menu button on the top left of the screen and click the “Add I/O Device” button on this menu and follow the procedure.

4. The socket should now be installed successfully and will appear on your Supla home screen. Slide this tab to the left to reveal the virtual switch and you should now be able to switch the socket by using your mobile device.

5. The name of the socket can be changed by holding a press on the socket tab and changing the ‘channel name’. The name of the assigned location can be changed by holding a press on the location section and changing the ‘location name’.

If you have any issues installing or using the app or creating an account, please contact Supla for advice. Answers to FAQs can be found here: https://www.supla.org/en/faq and further help can be found at https://forum.supla.org.

Simply Connect to the App
Apple Devices

1. The next step is to create an account for the Supla App that will be used to control the socket from your mobile device. For Apple devices, scan the QR code or search the App Store and download the
   Supla App on your chosen mobile device.

2. Click on “Create an account” and after creating login details an email should have been sent to your selected email address. If the email doesn’t appear then please also check your junk/spam folder.

3. Click on the web link that was sent to your email but do not sign in on the webpage at this point.

4. Reload the app on your mobile device and click the 3‐line menu button on the top left of the screen and click the add I/O device button on this menu and follow the procedure.

5. To put the socket into configuration mode, press the socket button for at least 10 seconds until the blue light starts to blink quickly. Release the button.

6. Press the “system settings” button on your mobile device and change the network on your mobile device to the one beginning with SUPLA.

7. The socket should now be installed successfully and will appear on your Supla home screen. Slide this tab to the left to reveal the virtual switch and you should now be able to switch the socket by using your mobile device.

8. The name of the socket can be changed by holding a press on the tab and changing the ‘channel name’. The name of the assigned location can be changed by holding a press on the location section and changing the ‘location name’.

If you have any issues installing or using the app or creating an account, please contact Supla for advice. Answers to FAQs can be found here: https://www.supla.org/en/faq and further help can be found at https://forum.supla.org.

Simply Connect to Google Home

1. Open your Google Home app, and open settings
2. Open ‘Works with Google’
3. Search ‘Supla’, choose ‘SUPLA.ORG’ as seen below. Sign into the Supla website when it comes up. Your account will automatically be linked. Choose the device you want to set up and set up as appropriate.
4. Use your socket with the device widget on the Google Home app, or with linked Google Home accessories.

Simply Connect to Amazon Alexa

1. Open your Amazon Alexa app, and tap more

2. Tap the search icon in the top right and tap ‘Skills & Games’

3. Search ‘supla’, choose ‘SUPLA’. Enable the Supla skill on your Alexa system.

4. Sign into the Supla website when it comes up. Grant access, and your
   account will be linked to Alexa. Your account is now linked.

5. Tap ‘Discover Devices’ for Alexa to recognise your new socket. You can now use your socket with the device widget on the Alexa app, or with linked Alexa accessories.

This is the print version of this leaflet, to see the digital version with screenshots, please go to www.varilight.co.uk/leaflets. Doyle & Tratt Products Ltd, Carylls Lea, Faygate, Horsham, W. Sussex, RH12 4SJ, UK. +44 (01293) 223333
Varilight Europe Kft, 2600 Vác, Althann Mihály Frigyes utca 2, Hungary.

References

• SUPLA
• VARILIGHT Instruction Leaflets
• supla.org - Wykaz forów
• SUPLA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>