OtterBox OBFTC-0094-A Wireless Charging Pad User Guide
- June 5, 2024
- OtterBox
Table of Contents
Quick Start Guide
OtterBox Charging Pad
OBFTC-0094-A, 78-80537, 78-80563,
78-80632, and 78-80633
Unpacking
Components
① USB-C Port
② Charging Pad
Charging your device
| 
---|---
Specification
| Input | 5V/3A 9V/2.22A 12V/1.67A |
|---|---|
| Output | 5Wireless 15W (Max) |
| Size Dimensions | 56.0×56.0x5.6mm |
| Weight | 61.0g |
| Temperature | Operating Temp: 0°C- +35°C Storage Temp.: -20°C- +70°C |
Manufacturer:
Company Name: DONGGUAN KETAIHONG ELECTRONICS CO., LTD
Address: Second Industrial Zone, Shujiu Village, Changping Town, 523569
Dongguan, Guangdong, PEOPLE’S REPUBLIC OF CHINA
Contact
For more information, please visit: https://www.otterbox.com
Attention
| Do not expose products to excessive heat (e.g. from storage in direct
sunlight, fire, or the like).
---|---
Do not try to take the product apart. It may cause serious damage
Do not drop or knock the product on hard surfaces.
Do not use chemicals or detergents to clean the product.
Use the original cable or certified cables.
WARNING — Do not hang any type of accessory or accessory bracket from the plug
Warranty
FCC Statement
Federal Communication Commission Interference Statement This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Non-modification Statement:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
ISED Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Radiation Exposure Statement
This equipment complies with Canadian radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 10cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>