GOLDEN LIGHTING 3318-M NB Journey Pendant Ceiling Light Instruction Manual

Table of Contents

GOLDEN-LIGHTING-3318-M-NB-Journey-Pendant-Ceiling-Light-
PRODUCT

Pendants & Linear Pendants Above a Kitchen Island

Center a linear pendant over the island. If hanging pendants, use one pendant for every 24″ of the island.
Fixtures should hang at least 30″ above the countertop.

Pendants & Chandeliers Above a Dining Room Table

Fixtures should stay at least 30″ above the table. Use a fixture that is 12″ narrower than the width of the table.

Pendants and Chandeliers in Open Areas

The bottom should hang at least 7.5 feet from the floor. Allow clearance for any opening doors.

We appreciate your business and hope you love your new light!

Great lighting can add value and enhance the look of your home. To ensure the best lighting in your space, remember to layer your lighting.
This ensures that your space will have both task and ambient lighting.
Coordinating fixtures like sconces, flush mounts, and pendants can help you meet your layered lighting needs and reinforce your desired aesthetic. Install the lights with dimmers that allow you to control the level of light output at any given moment.
Get function and style! Browse our site for coordinating lights and expert lighting advice. To help create the perfect look, visit www.GoldenLighting.com.
Love your light and want to show it off?
Follow us, share a picture, and tag us on Social.

How to Identify the Fixture’s Wires

Hot: Smooth, Black, or Transparent with Black Inner Thread
Neutral: Ribbed, White, or Transparent with White Inner Thread
Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
For Customer Service, contact the place of purchase to arrange for replacement parts.

IMPORTANT:

PREPARING FOR INSTALLATION

Carefully remove the new fixture from the carton as well as the yellow bag that holds all of the parts. See the important notes above. Shut off power at the circuit breaker and remove the old fixture from the wall, including the old mounting strap. 1.
From the parts bag remove the mounting strap (B) assembly. Mounting strap (B) contains several threaded holes.
Two sets of mounting screws (A & D) should be attached to the mounting strap (B).
You may need to tighten nuts (C) that hold mounting screws (A) in place.
If the screws are not attached, please hold canopy (F) up to the mounting strap (B). Line up the holes in the canopy (F) with the holes in the mounting strap (B), and insert mounting screws (A) into the holes in the mounting strap (B) so that mounting screws (A) protrude through the holes in the canopy (F). Mounting screws (A) are long, so please test the canopy against the mounting strap to see how far you should insert the screws. Tighten nuts (C) onto mounting screws (A) to hold the screws in place. 2.
Pull house wires through the center of the mounting strap (B). Place mounting strap (B) over the junction box and secure in place with mounting screws (D). Tighten the screws securely with a screwdriver.

ASSEMBLING THE FIXTURE

3. If swivel (H) is separated from the canopy (F), lock swivel (H) into the canopy (F) using the hex nut that is at the top of swivel (H). Measure to determine the correct number of rods (I) needed for proper hanging height.
To shorten the fixture, slide the desired number of excess rods off. If additional rods are needed, please contact the place of purchase to order more. Feed the fixture wires from post (J) and cover (N) through desired rods (I), swivel (H), and canopy (F).
Pull the wires until taut. Thread together rods (I) to secure. Thread the bottom rod onto the nipple (J) Pull the wires until taut. Thread the top rod into swivel (H) to secure the rods (I) to the canopy (F). Trim the wires to the desired length plus 8 to 10 inches.

CONNECTING THE WIRES

4. Have an assistant support the fixture’s weight while completing the wiring. Refer to the wiring diagram and attach the fixture’s wires to the power supply wires from the junction box.
Attach the fixture’s wires to the power supply wires from the junction box.
Connect Hot to Hot (transparent wire with black inner thread, black, or smooth wire)
Neutral to Neutral (transparent wire with white inner thread, white, or ribbed wire), and Ground to Ground (transparent wire with green inner thread, green wire, or copper).
Twist the ends of the wire pairs together, and then twist on a wire connector. Make sure all twists are in the same direction.
If there is no house ground wire coming from the junction box, locate ground screw (E) on the mounting bracket/mounting strap and wrap the fixture’s ground wire around the ground screw.
Use a screwdriver to tighten the top of the ground screw (E) onto the wires and into the mounting bracket/mounting strap. Tuck the wires into the junction box.

FINISHING THE INSTALLATION

5. Push the canopy (F) up to the ceiling until mounting screws (A) protrude from the holes in the canopy (F). Thread deco nuts (G) onto the exposed threads of mounting screws (A) until snug against the ceiling to secure.
Lift shade (L) over the socket (K) and secure in place with socket ring (M). Install a light bulb (not provided) into a socket (K) under the fixture’s specifications. Do not exceed the maximum wattage.
Your installation is now complete. Turn on the power and test the fixture.
GoldenLighting.com
Get help, quick tips, and explore curated content

| GOLDEN LIGHTING 3318-M NB Journey Pendant Ceiling Light [pdf] Instruction Manual
3318-M NB Journey Pendant Ceiling Light, 3318-M NB, Journey Pendant Ceiling Light, Pendant Ceiling Light, Ceiling Light
---|---