OtterBox 77-89452 2 in 1 Power Stand with MagSafe Instruction Manual
- June 12, 2024
- OtterBox
Table of Contents
OtterBox 77-89452 2 in 1 Power Stand with MagSafe Instruction Manual
2 in 1 Power Stand with Magsafe
SKU # 77-89452
RMN# OBFTC-0120-A
United States:
FCC Compliance:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC RF EXPOSURE COMPLIANCE:
This certified solution complies with the FCC portable RF exposure limits set
forth for an uncontrolled environment and are safe for intended operation as
described in the User manual. Further RF exposure reduction can be achieved if
the product can be kept as far as possible from the user body or set the
device to lower output power if such function is available.
Canada:
ISED COMPLIANCE STATEMENT: This Certified Solution contains license-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s license-exempt RSS(s). Operation of the Certified
Solution is subject to the following two conditions: (1) This Certified
Solution may not cause interference; and (2) This Certified Solution must
accept any interference, including interference that may cause undesired
operation of the Certified Solution.
IC RF EXPOSURE COMPLIANCE: The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in the user manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Verified Energy Performance:
European Declaration of Conformity:
UKCA Declaration of Conformity:
Taiwan RoHS Compliance:
WEEE:
This symbol on the product and/or accompanying documents means that used
electrical and electronic products should not be mixed with general household
waste. For proper treatment, recovery and recycling, please take this product
to a designated collection point where it will be accepted free of charge.
Alternatively, in some countries you may be able to return your product to
your local retailer upon purchase of an equivalent new product.
Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. “
IMPORTANT SAFETY INSTRUCTIONS
- Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, submerge in a liquid, or insert foreign objects into the power bank.
- Keep power banks out of the reach of children. Children should be supervised when a power bank is in use.
- Do not expose power banks to heat or fire.
- Do not store in direct sunlight or in a vehicle.
- Do not use or charge a damaged power bank.
- In the event of a power bank leaking, keep away from skin and eyes. Wash any affected area with large amounts of water and seek medical attention.
- Power banks need to be charged before use. Always use the correct cable and refer to the power bank manufacturer’s instructions for proper charging instructions. Do not use any cable other than that specifically provided or recommended by the power bank manufacturer. Do not use a damaged cable to charge or discharge a power bank.
- Do not leave a power bank on prolonged charge when not in use. Disconnect the power bank from the charging source once full.
- Observe the dedicated input and output ports for receiving and providing power on the power bank and the device to be charged to ensure correct use.
- Do not use any power bank which is not designed for use with the device you wish to charge. Refer to the device’s manual for proper charging instructions.
- When possible, detach cable(s) from power bank when not in use.
- Only use the power bank in the application for which it was intended.
- Store the power bank in a cool, dry place when not in use.
- When a power bank is not used for prolonged periods, the power bank should be charged periodically to maintain power bank life.
- Dispose of power bank properly.
Keep all instructions provided with the power bank for future reference.
Read More About This Manual & Download PDF: