OtterBox 77-89445 Multi Mount Power Bank with MagSafe User Manual
- June 12, 2024
- OtterBox
Table of Contents
OtterBox 77-89445 Multi Mount Power Bank with MagSafe User Manual
Canada:
ISED COMPLIANCE STATEMENT : This Certified Solution contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation of the Certified Solution is subject to the following two conditions: (1) This Certified Solution may not cause interference; and (2) This Certified Solution must accept any interference, including interference that may cause undesired operation of the Certified Solution.
Verified Energy Performance
European Declaration of Conformity
Document No.: 232′ DCil Date: 2022-10-6
EU DECLARATION OF CONFORMITY
This declaration of conformity is Issued under the sole responsibility of the manufacturer.
Manufacturer and EC Responsible Person Information
| Manufacturer| EC Responsible Person
---|---|---
Company Name| Power? Technology (bong Guan) Co., Ltd.| Otter Products tit
Address| No.28| 209 S Me!drum St, Fort Collins, Co. 80521 unitedStates
Contact| Joezhao| Steve Dressor
Email|
[email protected]|
STEVEDRESSOROOTTERPRODUCTS.COM
Telephone| 0769-8929-7777| 970213.7184
Product Information
Product Name| Mut-Maim Power Bank with Magsafe
Model| OBFTC-0122-A
Trade Mark| Oric-RBOX
Photo of Product|
The object of the declaration described above is in conformity with the relevant Community I^ armon saton legislation l EC directives:
-2011/1351E Ul RoRS)
-2014413WELIIEMM
References to the relevant standards used or references to the specifications in relation to which conformity is declared:
- EN 1E0310,73-3-22018+M-1020.EN 61000-3-320131402019.
- EN 5`032:2015+A1 12020, EN 5603520171A112020
signed on behalf of the Manufchtuer
Signature
Company Otter Product LLC
Name: Steve Dressor
Position: Regulatory Engineering Manager
Date: 2202/10/6
Taiwan RoHS Compliance
| Equipment Name: Wireless Charging Power Bank | Type Designation: OBFTC- 0122 -A |
|---|---|
| Unit | Restricted Substances and its Chemical Symbols |
| SMD Rsistor | Lead (Pb) |
| Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PDBDE) |
| Otterbox Wall Charger | _ |
| Electronic material | _ |
| _ | O |
Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the
percentage content of the
Note 2: “o” indicates that the percentage content tof the restricted
substance does not exceed the percentage of | reference value of ‘presence.
Note 3: The “—” indicates that the restricted substance corresponds to
the exemption
WEEE:
This symbol on the product and/or accompanying documents means that used
electrical and electronic products should not be mixed with general household
waste. For proper treatment, recovery and recycling, please take this product
to a designated collection point where it will be accepted free of charge.
Alternatively, in some countries you may be able to return your product to
your local retailer upon purchase of an equivalent new product. Disposing of
this product correctly will help save valuable resources and prevent any
potential negative effects on human health and the environment, which could
otherwise arise from inappropriate waste handling. Please contact your local
authority for further details of your nearest designated collection point.
IMPORTANT SAFETY INSTRUCTIONS
-
Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, submerge in a liquid, or insert foreign objects into the power bank.
-
Keep power banks out of the reach of children. Children should be supervised when a power bank is in use.
-
Do not expose power banks to heat or fire.
-
Do not store in direct sunlight or in a vehicle.
-
Do not use or charge a damaged power bank.
-
In the event of a power bank leaking, keep away from skin and eyes. Wash any affected area with large amounts of water and seek medical attention.
-
Power banks need to be charged before use. Always use the correct cable and refer to the power bank
manufacturer’s instructions for proper charging instructions. Do not use any cable other than that specifically provided or recommended by the power bank manufacturer. Do not use a damaged cable tocharge or discharge a power bank. -
Do not leave a power bank on prolonged charge when not in use. Disconnect the power bank from the charging source once full.
-
Observe the dedicated input and output ports for receiving and providing power on the power bank and thedevice to be charged to ensure correct use.
-
Do not use any power bank which is not designed for use with the device you wish to charge. Refer to the device’s manual for proper charging instructions.
-
When possible, detach cable(s) from power bank when not in use.
-
Only use the power bank in the application for which it was intended.
-
Store the power bank in a cool, dry place when not in use.
-
When a power bank is not used for prolonged periods, the power bank should be charged periodically in order to maintain power bank life.
-
Dispose of power bank properly
Keep all instructions provided with the power bank for future reference.
Documents / Resources
|
OtterBox 77-89445 Multi Mount Power Bank with
MagSafe
[pdf] User Manual
77-89445 Multi Mount Power Bank with MagSafe, 77-89445, Multi Mount Power Bank
with MagSafe, Power Bank with MagSafe, Bank with MagSafe
---|---