OTTERBOX 78-80870 3 In 1 Charging Station with MagSafe User Guide

: June 4, 2024
: OtterBox

Table of Contents

OTTERBOX 78-80870 3 In 1 Charging Station with MagSafe
Unpacking
Components
Charging your device
Specification
Attention
WARNING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OTTERBOX 78-80870 3 In 1 Charging Station with MagSafe

OTTERBOX-78-80870-3-In-1-Charging-Station-with-MagSafe-
PRODUCT

Unpacking

OTTERBOX-78-80870-3-In-1-Charging-Station-with-MagSafe-
FIG-1

Components

Input USB-C Port
Wireless Appla Watch Charger
Wireless Magsafe Charger

Charging your device

OTTERBOX-78-80870-3-In-1-Charging-Station-with-MagSafe-
FIG-3

Specification

OTTERBOX-78-80870-3-In-1-Charging-Station-with-MagSafe-
FIG-4

Manufacturer:
Company Name : DONGGUAN KETAIHONG ELECTRONICS CO.,LTD
Address : Second Industrial Zone, Shujiu Village, Changping Town, 523569 Dongguan, Guangdong, PEOPLE’S REPUBLIC OF CHINA

Contact
For more intormation, please visit:
https:/www.otterbox.com

Attention

Do not expose products to excessive heat (e.g. from storage in direct sunlight, fire or the like).
Do not try to take the product apart. It may cause serious damage
Do not drop or knock the product on hard surfaces.
Do not use chemicals or detergents to clean the product.
Use the original cable or certified cables.

WARNING

FCC Statement
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiveris connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Non-modification Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator & your body.

Made for