Connects2 CAM-VW7 Volkswagen Twin Rear Door Camera User Manual
- June 14, 2024
- Connects2
Table of Contents
User Manual
CAM-VW7
CAM-VW7 Volkswagen Twin Rear Door Camera
Volkswagen Twin Rear Door Camera Volkswagen Transporter T5/T6
PRODUCT FEATURES:
Image Sensor: 1/3″ CMOS
TV Lines: 700 TV
System: PAL
Image: Mirror
Viewing Angle: 170 Degrees
Operating Voltage: 12V DC (Negative Ground)
Current Consumption: 37mA @ 13.8V
Enhanced Performance In Low Light: Yes
Waterproof Rating: IP69K
Operating Temperature: -40 Degrees C to +80 Degrees C
DISCLAIMER:
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for
installation. Please ensure you use the correct tools to avoid damage to the
vehicle or product.
Connects2 can not be held responsible for the installation of this
product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter
any technical issues. With this in mind, when contacting Connects2, try to
provide as much Information as possible. This will speed up the process and
help us to help you.
Please use our dedicated online technical support
centre:support.connects2.com
CONTENTS
- Camera with 1m cable to mini Male 4pin connector
- Camera connection cable with mini Female 4pin connector to Male 4pin connector
- Instructions
INSTALLATION
- Remove the relevant brake light housing from the vehicle and carefully remove the bulbs/bulb holder assembly.
- Insert the bulbs/bulb holder assembly into the CAM-VW7 and refit to the vehicle taking care not to trap any cables.
- Connect the camera cable to the camera connection cable.
- Connect the camera connection cable to the display monitor using an extension/4pin to RCA convertor cable and ensure that the image is displayed correctly.
Subscribe to our YouTube Channel for installation guides and tips… www.youtube.com/connects2
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>