AXAGON HMC-6GM2 6 In1 USB-C 10 Gbps HUB Instruction Manual
- June 14, 2024
- AXAGON
Table of Contents
AXAGON HMC-6GM2 6 In1 USB-C 10 Gbps HUB
INSTRUCTION
- Mount M.2 SSD disk to the hub. (fig. 1-3 on the next page)
- Connect the hub to the PC USB port.
- An automatic installation will be performed. No need to install any external drivers.
- The hub is ready.
- In the Disk Manager, please initialize the new M.2 disk and format it. (fig. 4)
OPEN THE BOX
INSERT THE NVMe/SATA M.2 SSD DISK
COMPLETE THE M.2 SSD DISK & CLOSE THE BOX
INITIALIZE THE NEW DISK AND FORMAT IT IN DISK MANAGEMENT
SAFE DISCONNECTION OF EXTERNAL DEVICE
The safest method for removing from the computer is the utilization of the
Safely Remove Hardware function in the Windows operation system.
TECHNICAL SPECIFICATIONS
-
INPUT INTERFACE:
USB-C- USB 3.2 Gen 2 (SuperSpeed USB 10Gbps)
- Backwards compatible with USB 3.2 Gen1 (USB 3.0) • USB 2.0
- Fixed 20 cm long cable with USB Type C male connector
-
OUTPUT INTERFACE:
USB-A- 1x USB 3.2 Gen 2 port for data with USB Type-A female connector
- 1x USB 3.2 Gen 2 port for data with USB Type-C female connector
- up to 0.5 Amp charging on USB port
-
HDMI
- HDMI A female connector • Max. resolution 4K/60Hz (4096 x 2160 @ 60Hz)
- HDCP 1.4 a 2.3 (High-bandwidth Digital Content Protection) support
- TMDS (Transition Minimized Differential Signaling) support
- 8-CH LPCM audio – compress audio (AC-3, DTS) and HBR audio format support
- Up to 192kHz / 24bit – depends on source and target device parameters i.e. notebook/phone and TV/monitor/AV receiver
- *Audio + Video function requires DisplayPort Alternate Mode (DP Alt Mode) or Thunderbolt 3 compatible port + OS support
-
M.2 SSD slot
- NVMe/SATA M.2 SSD single or double-sided disks, no disk capacity limitation
- Dimension support: 2230, 2242, 2260, 2280 mm
- B-KEY AND B+M-KEY disks supported
- NGFF 75-pin B-key slot • Serial ATA specification revision 3.1 (SATA/600)
- UASP • TRIM • SSD boot support
-
Power Delivery 3.0
- USB Type C female connector
- Notebook/phone charging through the hub
- Max power through the hub 100W (20V/5A)
- *requires a device with PD power support and matching PD charger
-
OTHER FEATURES:
- Plug and Play & Hot Plug • Power Delivery power / USB bus power
- powered from a PD charger or USB-C port
-
SIZE NET WEIGHT:
149 x 65 x 17 mm & 178 g • Cable Length 20 cm -
OS SUPPORTED:
- Windows 10 • 11, Server, macOS, Linux, Android, Chrome OS
- Updated OS required. Automatic driver installation – no driver needed.
- Correct PD and DP Alt Mode function depends on OS and device manufacturer support.
TECHNICAL SUPPORT: More information, FAQs, manuals, and drivers can be
found on the product page in the PRODUCT SUPPORT tab at
www.axagon.eu.
Nothing helped? Write to our technical support:
support@axagon.cz. At the end of its service life,
do not throw the product into household waste; take it to a collection point
for electrical equipment recycling. For information about collection and
recycling programs in your country, contact your local authorities or the
retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonization
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The
complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user’s instructions.
The manufacturer disclaims any liability for damage that may occur due to
improper use of the product or failure to follow the instructions contained
herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/hmc-6gm2#supportLinkGoal
SuperSpeed USB hub with M.2 SSD, HDMI, CardReader, PD, USB ports.
© 2023 AXAGON
Výrobce / Manufacturer: RealQ s.r.o. – Železná 5, 619 00 Brno, Czech Republic
All rights reserved. All text and pictorial materials contained in this
document are protected by the Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners. Specifications are subject to change without prior notice. Made in
CHINA for Axagon.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>