AXAGON 395 4 Port Superspeed USB-C Travel Hub Instruction Manual
- June 14, 2024
- AXAGON
Table of Contents
AXAGON 395 4 Port Superspeed USB-C Travel Hub
INSTRUCTION
- Turn on computer.
- Connect the hub to the PC USB port.
- An automatic installation will be performed. No need to install any external drivers.
- The hub is ready.
INFO
Any USB charger and a suitable cable with a USB-C connector can be used for
external power supply of the hub (recommended charger outputV current is 2A).
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/hue-c1a#supportLinkGoal
Four-port SuperSpeed USB hub
TECHNICAL SPECIFICATIONS
INPUT INTERFACE
USB 3.2 Gen 1 (USB 3.0) • USB 2.0
5000 • 480 • 12 • 1.5 Mbit/s (Super • High • Full • Low Speed)
USB Type A male connector
20 cm FIXED USB CABLE
OUTPUT INTERFACE
4 USB 3.2 Gen 1 ports with USB Type-A female connectors
POWER SUPPLY
- up to 1.5 Amp CHARGING on USB ports
- power through USB bus or
- power through optional power adapter (5V/2A min)
OTHER FEATURES
- APPLE CHARGING supported
- Over Current Protection
- up to 3 external disks can be connected at the same time
AUTOMATIC INSTALLATION
Plug & Play • Hot Plug
LED INDICATION
the LED indicates the connection of the hub to the power supply
OS SUPPORTED
- Windows
- macos
- Linux
- Chrome 0S
- Android
TECHNICAL SUPPORT
- More information, FAQs, manuals, and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu.
- Nothing helped? Write to our technical support: support@axagon.cz.
- At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programs in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity
- The device complies with the harmonization legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS).
- The complete EU declaration of conformity is available from the manufacturer. Before using the product, the user is obliged to read the user’s instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
- Do not use the product in humid or explosive environments and near flammable substances.
© 2023 AXAGON
Manufacturer : RealQ s.r.o. – Zelezná 5, 619 00 Brno, Czech Republic
All rights reserved. All text and pictorial materials contained in this
document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice.
Made in China for AXAGON.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>