AXAGON CRE-SMPC USB C Smart Card ID Card PocketReader Instructions
- June 14, 2024
- AXAGON
Table of Contents
AXAGON CRE-SMPC USB C Smart Card ID Card PocketReader
Instructions for use (original)
- Turn on the computer.
- Connect the reader to the computer USB port.
- An automatic installation will take place. No external drivers are required.
- The Smart Card Reader is ready.
- Insert the Smart Card into the reader.
- Check the successful installation in the Device Manager (Fig. 1 ).
DRODIJCT SUPPORT LI IK
http://axagon.eu/produkty/cre-smpa#supportLinkGoal
USB Smart Card reader
FIGURE 1
Using Device Manager to check correct installation in Windows 10
– only devices added to the Device Manager during card installation are
displayed
SUPPORTED SMART CARDS
CARD WITH A VISIBLE CHIP – SUPPORTED
CARD WITHOUT A VISIBLE CHIP – NOT SUPPORTED
HOW TO INSERT CARDS & LED INDICATION
TECHNICAL SPECIFICATIONS
INPUT:
- USB 2.0 • USB 1.1
- USB 2.0 CCID protocol
- Built-in USB 2.0 type A male connector
SMART CARD SLOT:
- supports Contact Smart Cards for ATM I CACI ID/ IC/ SIS
- Contact Smart Cards ISO 7816, class A, Band C (SV, 3V and 1.8V)
- Standards ISO 7816, EMV 4.1
- Protocols T ==0 and T == 1, 12(
- SLE 4432/ 42 (S== 10), SLE 4418/28 (s=9)
- PC Smart Card standard PC/SC 2.0
- FIPS 201
- Microsoft Smart Card for Windows
- Microsoft WHQL USB Smart Card Reader
- l2C cards SLE 4418, SLE4428, SLE 4432, SLE4442, SLE4436, SLE5536,SLE 6636, AT88SC1608, AT45D041
- Smart Card interface speed 420 Kbps (depend on card)
OTHER FEATURES:
- Plug and Play
- Hot Plug
- Hot Swap
- USB bus power
- AUTO install
- Sleep mode support
OS SUPPORTED
-
Windows: XP /Vista/ 7 / 8.1 / 10 / 11 & later
Server: 2003 / 2008 / 2012 I 2016 / 2019 I 2022 & later 32 & 64bit versions supported -
Mac OS X 1 0.x & later
-
Linux 2.4.x & later
-
Android 8 & later
TECHNICAL SUPPORT: More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: support@axagon.cz.
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation
legislation of the European Union 2O14/30/EU (EMC) and 2O11/65/EU (RoHS).
The complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
Do not use the product in humid or explosive environments and near flammable substances.
© 2023 AXAGON
Vyrobce / Manufacturer: RealQ s.r.o. – Zelezna 5, 619 00 Brno, Czech Republic
All rights reserved. All text and pictorial materials contained in this
document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice.
Made in CHINA for Axagon.
CUSTOMERS SUPPORT
