AXAGON PCEM2-XS Solid Internal PCIe Adapter Instructions
- June 14, 2024
- AXAGON
Table of Contents
AXAGON PCEM2-XS Solid Internal PCIe Adapter
Instructions for use:
- Mount the SSD disk.
- Turn off your computer and unplug the power supply cable.
- Open the cabinet and insert the adapter into a free PCI-Express position.
- Close the case, connect the power and turn on the computer.
- Automatic installation will take place-no drivers are required.
- SSD disk is ready.
- Check the successful istallation in Device Manager.
- Initialize and format the new disk in the disk manager. (fig B)
Internal PCIe Adapter for connection NVMe M.2 SSD
- UNSCREW THE HEAT SINK
-
ONLY FOR ONE SIDED M.2 SSD DISK III
-
INSERT THE M.2 SSD DISK
- Fix the M.2 SSD Disk
- INSERT THE UPPER THIN COOLING PAD
- COMPLETE THE PCIe ADAPTER
FIGURE A:
FIGURE B:
TECHNICAL SPECIFICATIONS
-
INPUT INTERFACE
NVMe (PCle) M.2 SSD DI SK
Single and double sided
All capacities supported -
OUTPUT INTERFACE
PCI-EXPRESS (All specifications)
supported x4 I x8 I x16 slot• Theoretical speed up to 8Gbps (Bidirectional) -
LENGHT SUPPORTED
2230 I 2242 / 2260 I 2280 (22xl0-22x80mm) -
COOLING
copper holes through the PCB+ thermal pads+ heatsink with ribbed surface for better heat dissipation -
SIZE & NET WEIGHT
10Sx45x 12 mm&Slg -
POWER SUPPLY
Powered via PCI-Express bus -
LED INDICATION
Decent LED indicates disk connection and data transfer -
OTHER FEATURES
Automatic installation – No driver needed
BOOT• NVM Exp,ess • Plug and Play -
OS SUPPORTED
All OS supported
Note : When ‘Mndows 7 used it is necessary to check OS support and driver availability with the M-2 SSD manufacturer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>