POWERQI AIR1510 Surface Wireless Charger User Manual
- June 14, 2024
- POWERQI
Table of Contents
POWERQI AIR1510 Surface Wireless Charger
SPECIFICATION
Charger
The charger comes with a 2m long USB cable, ready to plug into a transformer,
computer, or hub
- The plate clamps the charger to the desk
- For added security, the plate can be fixed to the desk using the wood screws provided
- 8 different length bolts are provided to enable you to secure your charger to a range of desk thicknesses
- Spacers provided may need to be used with the bolt for certain desk thicknesses
- To tighten the bolt
- Use adhesive cable clips provided to tidy the power cable to the underside of the desk
Installation
- Fit the charger into 80mm hole in work surface (i.e. standard grommet hole)
- Secure the charger to the work surface with the steel plate provided, using the appropriate length bolt (use 16mm bolt for standard 1″ desk)
- use wood screws for extra security
- Plug USB cable into power source (USB plug or hub) and then the charger will be ready to charge devices when placed on top
User Manual
FCC compliance statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Wireless Surface Charger
Install this wireless surface charger in any desk, meeting table or other
worksurface, and enjoy the convenience of being able to charge smartphones and
tablets without being tethered or having the hassle of finding a power point.
Features
Supports Qi compatible devices and air charge accessories
- Fits to range of work surface thicknesses (18mm – 50mm)
- Can be secured to work surface using screws provided
- USB power cable allows multiple units to be connected to hub (plug/ hub supplied separately)
Specification
This product supports any Qi compatible smartphone or case/ accessory. Qi is a
global standard for wireless power, and air charge are a member of the
wireless power consortium. Find out more about Qi at
www.wirelesspowerconsortium.com
Please recycle when disposing of this product, and do not trash or throw in
fire. Avoid close proximity of bank cards, other magnetic strips, and
implantable medical devices to prevent interference or corruption.
Learn more
- You can find out more about air charge products at www.air-charge.com
- You can also scan the QR-code below to view a video of this product.
UKCA Declaration of Conformity
CMS Industries hereby declares on its own responsibility that the product
conforms to the essential requirements of the UK Regulations. A full UKCA
declaration can be found by scanning the QR code below.
CE Declaration of Conformity
CMS Industries hereby declares on its own responsibility that the product
fulfils the basic requirements and the other pertinent provisions of
2014/53/EU (Radio Equipment Directive). A full CE declaration can be found by
scanning the QR code below.
Manufactured by
- CMS Industries,
- Downsview House,
- Downsview Road,
- Wantage, OX12 9FA,
- United Kingdom
Surface Wireless Charger AIR1510