POWERQI LC77 Magnetic Wireless Charging Stand User Manual

June 5, 2024
POWERQI

POWERQI LC77 Magnetic Wireless Charging Stand

POWERQI-LC77-Magnetic-
Wireless-Charging-Stand-product

Product Colour, Material & Finishing Specifications

  • Product Model: LC77 Brand Part number 3-608LC770600A0001
  • Product Type Description Job No. QH-SMS-22004 V1.0(LC77)
  • Dimension: 73x55mm Original Designer Date
  • Scale:  1:1 Technology 128g Verifying 2022.3.23
  • Revision: 1.0 Change description

Magnetic Wireless Charging Stand

Connect to Power Adapter

POWERQI-LC77-Magnetic-Wireless-Charging-Stand-
fig-2

  • Pugtne power adapter into the socket.
  • Connect the Type-c power cable to the adapter.

Note: The 20W wall charger needs to buy separately.

Correct Charging Mode

POWERQI-LC77-Magnetic-Wireless-Charging-Stand-
fig-3

  1. Open the stand from the buckle position as indicated by the arrow Adjust the charger stand to the proper angle, and place the magnetic wireless charging phone on the charging pad. The magnetic wireless charging phone will attach to the pad well automatically and support view angle adjustment.
  2. Magnetic wireless charging phones could be charged when the charger stand is folded, the phone will be attached to the pad well automatically, which could adjust the view angle with your preference.

Note: This product supports wireless charging to the wireless charging devices without a magnet built-in.

Note

  1. Do not squeeze or collide.
  2. Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage.
  3. Do not use the wireless chargers in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
  4. Do not place too close with a magnetic stripe or chip card (ID card, bank cards, etc.) to avoid magnetic failure.
  5. Please keep the distance at least 20cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless chargers, to avoid potential interference with the medical device.
  6. To take care of the children, to ensure that they won’t play with the wireless charger as a toy, to avoid unnecessary accidents. The involved images are sketch maps, the final product as per the material subjects.

Includes: wireless charger, user manual.

Specification

  • Charging distance: 10mm
  • Input:5V=3A 9V=2.22A 12V=1.67A
  • Output: 5W/7.5W/10W/15W
  • Frequency: 115-205KHz
  • Conversion:>72%
  • NW: 94g
  • Dimensions: 75X57X10mm

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit with different
  • Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCsRF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm from the radiator and your body: Use only the supplied antenna.

Documents / Resources

| POWERQI LC77 Magnetic Wireless Charging Stand [pdf] User Manual
LC77C, 2AFP2LC77C, LC77, Magnetic Wireless Charging Stand, LC77 Magnetic Wireless Charging Stand
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

POWERQI User Manuals

Related Manuals