FOXEER T-REX MINI 1500TVL 1.7mm FPV Camera Instruction Manual
- June 6, 2024
- FOXEER
Table of Contents
WARNING: Read the ENTIRE instruction manual to become familiar with the
features of the product before operating. Failure to operate the product
correctly can result in damage to the product, personal property and cause
serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
NOTICE: This product is only intended for use with unmanned, hobby-grade,
remote-controlled vehicles and aircraft. FOXEER disclaims all liability
outside of the intended purpose and will not provide warranty service related
thereto.
SUPPORT: Visit www.foxeer.com/ to get more
information.
CAMERA-OSD SWITCH CONNECTION
5 Pin Harness
VCC: DC 4,5-16V in (Red)
GND: Ground Wire(Black)
VID: Video out(Yellow)
VSEN: Voltage Senser(Blue)
OSD: OSD (White)
- Connect the VSEN cable Wherever you want to detect the voltage
CAUTION: If you are using ESC’s with active braking, we recommend powering the camera system through a BEC or voltage regulator.
CAMERA-VIDEO TRANSMITTER CONNECTION
To connect the camera directly to the video transmitter, plug the 3 pin wiring harness from the video transmitter into the camera, or you can power the camera by another device, PDB, FC, Bat…
MENU
MENU: Push MENU(center button) to go to the main menu.
UP/DOWN: Move up and down through the menu.
Left/Right: Modify the menu parameters.
IMAGE
- FLIP: OFF/ H-INV/ V-INV/ HV-INV2. SHARPNESS: 0~10.
- COLOR GAIN: 0~20.
- GAMMA: 0.55.
- DNR(Digital Noise Reduction): OFF/LOW/MIDDLE/HIGH.
AWB
White Balance, do not suggest changing it
MODE: AUTO/ MANUAL.
MANUAL:
C-TEMP: 5000K
R-Gain: 0~20
B-Gain: 0~20
EXPOSURE
- BRIGHTNESS: 0~20.
- SHUTTER: AUTO/MANUAL/FLICKER.
- AGC(AUTOMATIC GAIN CONTROL): 0~10.
DAY&NIGHT
MODE: COLOR /AUTO//W&B.
AUTO:
D>N THREE: 1~20.
N>D THREE: 0~19.
DELAY: LOW/MIDDLE/HIGH.
LANGUAGE
LANGUAGE: ENGLISH/CHINESE
SYSTEM
- CAM TITLE: LEFT DOWN/OFF.
- VOLTAGE: ON/OFF.
- TIMER: ON/OFF.
- CVBS: PAL/NTSC.
- OUTPUT: 4:3/16:9.
- CAM VERSION: V06.03.20I.
RESET
Long press the button, when the screen flicker once, the reset is done, return to the camera’s initial setting.