Razer Viper Firmware Updater Instruction Manual
- June 6, 2024
- Razer
Table of Contents
FIRMWARE INSTALLATION INSTRUCTIONS
RAZER VIPER FIRMWARE UPDATER GUIDE
UPDATER INFORMATION
APPLICABLE MODEL NUMBERS
- RZ01-02550
DRIVER NAME AND VERSION
Viper_Mouse_FirmwareUpdater_v1.07.01 _r1
Download the firmware updater here: http://rzr.to/PrIDN
RELEASE NOTES:
- Added a 28ms wait period after the first click to avoid accidental clicks.
PREPARATIONS
-
Make your laptop is plugged into a wall outlet and not just run on battery before
-
Save any open documents on your computer and close all other programs before attempting the update.
-
Download the firmware from the link above.
Note: It is recommended to download and install the latest firmware version. -
Run updater and follow the installation steps below:
INSTALLATION PROCESS
-
Run the updater as shown below:
-
You may be prompted to confirm changes on your device by the User Account Control. Click “Yes” to confirm these changes.
-
Click “NEXT” to proceed. The installer will close all running Razer applications if you have not done so yet.
-
Connect the device to the computer and then click “UPDATE”.
-
Wait until the update process is complete. Do not interrupt.
-
When the update is complete, click “CLOSE”.
FOR GAMERS BY GAMERS.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>