POWERQI FD14 3-in-1 Wireless Charging Station User Manual

POWERQI FD14 3-in-1 Wireless Charging Station

Product Colour, Material & Finishing Specifications

Thanks for choosing us!

This product is a triad wireless charger, support smartphone /Airpods/Apple Watch charging at the same time

Please kindly read the user manual before using and keep it for future reference.

Specification

• Input: DC5V,2A DC9V,1.67A DC12V,1.5A-2.5A
• Output(Phone): 5W/7.5W/10W/15W
• Output(Apple Watch): 5W
• Output(Airpods): 5W
• Frequency: 115-326.5  KHZ
• Charging distance: ~l0mm
• Conversion: >72%
• NW: 315g
• Dimensions: 160×90×92mm

Connect to Power Adapter

1. Connect the power adapter to socket.
2. Connect adapter to the Type-C interface
3. The white LED light of charger will flash 3times when power on, then enter to standby mode.
   *QC3.0 wall charger need to buy separately, please use the connector adapter accordding to your wall charger USB output port.

Charging Mode

1. Make sure the wireless charger dock connect to the power supply
2. The smartphone/Airpods/Apple Watch don’t placed on product corresponding charge position,Long bright, light blue, such as when a metal foreign body placed on the pad, indicator light blue lights flashing

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful inter-ference,
2. this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

The involved images are sketch maps, the final product as per the material subjects.

Includes: wireless charger, Power cable, user’s manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>