POWERQI LC04 Sound Box Wireless Charger User Manual
- June 6, 2024
- POWERQI
Table of Contents
Sound Box
Wireless Charger
User Manual
Thanks for using this product, this is a Sound Box Wireless Charger, allowing
users to enjoy the digital products wireless charging unlimited fun.
Please read this manual carefully and keep it properly for reference before
using the Sound Box Wireless Charger.
Connect to Power Adapter
- Connect the power adapter to socket.
- Connect adapter to the Type-C interface, the other Type-C to pad.
Note: this product works with Type-C to Type-C charging cable. Only QC 2.0 or QC3.0 standard power adapter supprt this product’ s quick charge functon. You need to buy power adapter separately. Type-C to Type-C charging cable and power adapter need to buy separately
Usage of night light
- Tap the to open the white noise sleeping function.
- Tap the to set the white noise.
- Tap the to set the last piece next piece.
Charge the phone wirelessly
- Make sure the wireless charger dock connect to the power supply.
- Put the Qi-enabled smart phone properly on the transmitter and starts recharging.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
FCC ID:2AFP2LC04
Specification
Input: DC5V 2A, DC9V 1.67A, DC12V 1.5A
Output: 5W/7.5W/10W/15W
Frequency: 110∼205KHZ
Dimensions: Φ85×40mm| Charging distance: ≤10mm
Conversion: ≥72%
NW.: 100g
---|---
Product Colour, Material & Finishing Specifications
Product Model|
LCO4
| Brand| | Job No.|
Product Type|
| Description| /| Revision|
Dimension|
85*65mm
| Original Designer| | Date|
2021/6/22
Scale|
1:1
| Technology| 128g| Verifing| /
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>