KICKER 48BTCAN65-CIC BT Cans Speaker System Instruction Manual
- June 12, 2024
- KICKER
Table of Contents
KICKER® BT Cans
Info Card
IMPORTANT:
KICKER recommends a professional installation performed by authorized
retailers. You are solely responsible for safely mounting and wiring your
products.
Thank you and congratulations on your purchase of the KICKER BT Cans Speaker
System! The BT Cans are the next generation in mobile audio systems, combining
the innovations of new transfer protocols with KICKER’s finest speaker and amp
performance. This audio system has everything you need ready to roll right out
of the box. Bluetooth and AUX Input, integrated amplifier, RGB lighting, line
output, and a remote control built to mount in a standard marine panel. And at
its heart, the high-powered amp and 6.5” speakers pack a punch with KICKER
signature quality audio.
If you have a problem with this product, prior to returning the product to the
store,Contact KICKER Tech Support Call us at 800-256-KICK (5425), or contact
us at [email protected] with any questions
or problems.
Thank you for your KICKER purchase!
US. Customers Only
Scan here for owner’s manual
IMPORTANT SAFETY WARNING! PROLONGED CONTINUOUS OPERATION OF AN AMPLIFIER, SPEAKER, OR SUBWOOFER IN A DISTORTED, CLIPPED, OR OVER-POWERED MANNER CAN CAUSE YOUR AUDIO SYSTEM TO OVERHEAT, POSSIBLY CATCHING FIRE AND RESULTING IN SERIOUS DAMAGE TO YOUR COMPONENTS AND/OR VEHICLE. AMPLIFIERS REQUIRE UP TO 4 INCHES (10CM) OPEN VENTILATION. SUBWOOFERS SHOULD BE MOUNTED WITH AT LEAST 1 INCH (2.5CM) CLEARANCE BETWEEN THE FRONT OF THE SPEAKER AND ANY SURFACE. KICKER PRODUCTS ARE CAPABLE OF PRODUCING SOUND LEVELS THAT CAN PERMANENTLY DAMAGE YOUR HEARING! PLEASE USE COMMON SENSE WHEN CONTROLLING VOLUME.
Installation
Install the included 15A fuse on the Yellow +12V Constant wire within 18” of the battery. Connect the battery ring terminals of the Yellow +12V Constant and Black Ground wires to the battery. Connect the Red +12V Ignition Wire to the switched ignition power source, or dash-mounted switch. Using the included splice connectors, connect the right speaker to the left speaker. Connect the male LED plug (4-pin molex) to the female LED plug (4-pin molex). Use the KMLC (sold separately) to control the RGB LED lighting. Connect the remote control to the remote input. Mount the remote control in your vehicle.
Use the multi-function button on the Right BT65 to control.
Short Press – Source
Long Press – Pairing
Very Long Press – Reset
Double-Press – Play/Pause
Bluetooth Pairing
Press and hold the Source/Pair button of the remote, or the multi-function
button of the Right BT65, to enter Bluetooth pairing mode.
The LEDs will begin to blink blue. Select BT CANS KICKER from your list of
Bluetooth devices. Once successfully paired, the LEDs will turn solid blue.
Please see the owner’s manual for more installation and operation
instructions. Remote not required for operation. Remote uses Carling-style
cutout.
