POWERQI FC50 Wireless Charging Car Dock User Manual
- June 1, 2024
- POWERQI
Table of Contents
- POWERQI FC50 Wireless Charging Car Dock
- Product Specifications
- Product Usage Instructions
- Frequently Asked Questions
- Integral sketch
- Specification
- Package contents
- Installation of charger
- Connect the power supply wire
- Charging for mobile phones
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
POWERQI FC50 Wireless Charging Car Dock
Product Specifications
- Model: FC50
- Dimensions: 90mm x 65mm
- Ratio: 1:1
- Weight: 128g
- Part Number: 3-608FC500690A0001
- Release Date: August 19, 2016
Product Usage Instructions
Quick Start Guide
To begin using the FC50 product, follow these quick steps:
- Ensure the product is properly unpacked and all components are included.
- Insert the required batteries or connect to a power source, if applicable.
- Power on the FC50 according to the user manual Vinstructions.
Operating Instructions
Once the FC50 is powered on, you can use it for various functions. Refer to the user manual for specific operating instructions based on your needs.
Maintenance and Care
Proper maintenance and care can extend the lifespan of your FC50. Follow these tips:
- Keep the product clean and free from dust or debris.
- Avoid exposure to extreme temperatures or moisture.
- Store the product in a safe and dry place when not in use.
Frequently Asked Questions
Q: How do I change the settings on the FC50?
A: To adjust settings, refer to the user manual for detailed instructions on navigating the menu and making changes.
Q: Is the FC50 compatible with all devices?
A: The FC50 may have compatibility limitations. Refer to the product specifications and user manual for information on compatible devices.
Thanks for purchasing our product this is a vehicle-mounted wireless charger
for smartphones, It could be used as a vehicle-mounted mobile bracket,
meanwhile, prolonging the time of battery. Let you enjoy the great fun of
digital products.
Please read this manual before using and keep it for future reference.
Integral sketch
Specification
- Input: DC5V 3A DC9V 2A DC 12Vl.5A
- Frequency: 113-205KHz
- Charging distance: ~10mm
- Conversion: ~72%
Package contents
Note: This product unive<selly support 1wo modes of wireless charging
-
Fast Wireless Charging {output 15W)
It works will device that support fast wireless charging such as Samsung Galaxy 56 Edge+, Galaxy Note5, Galaxy 57, and Galaxy 57 Edge. -
Standar<l WirelBSS Charging (oulpul 5W)
It works with Devic: which Oliy supports standard wirt1IBSS charging, such as Samsung Galaxy S6, S6 Edge and iPhones with Qi receivers.
Installation of charger
- Put the wireless charging transmitter’s buckle on transmitter bracket’s buckle and fixed it.
- To avoid the rough surface of dashboard reduce the stickness of suction mount, please install the holder on the horizontal dashboard and press the bottom of holder hard to make sure the PU sticker surface fit together tightly with dashboard.
- Pinch fixed lever until it dosed and check the fixed status.
Installation of charger
- Mount wireless charger onto the air vent mount by connecting the two brackets.
- Push the spring lock buckle forward. place and engage the hook buckle onto the fender of car’s air condition vent
- Position mats bracket into the vent edge, affix, and adjust the mats bracket according to the vent area to secure the vent mount and wireless charger.
Connect the power supply wire
- Connect the Micro USB charging cable to the wireless charger.
- Insert the other end of USB cable to the USB port of the cigarette lighter socket Insert the socket to the vehicle’s cigarette lighter port.
“The LED status light on the cigarette lighter charger will turn to green in standby mode Indicating wl re less charger device Is properly connected to the power source.
Charging for mobile phones
- Press the button on the top of wireless charger to release the clamp of the phone holder.
- Press the botton on bottom of wireless charger to release the clamp of bottom bracket.
- Place the Qi-enable device in the cell phone holder and retract the elastic clamp until the phone is firmly fixed and secured. Blue LED light indicates charging.
Notes
- Do not squeeze or collisions.
- Do not disassemble or throw into fire or water, to avoid causing a shon circuit leakage.
- Do net use wireless charger in severely hot, humid or corrosive environments, to avoid cira.1it damage and occurs leakage phenomenon.
- Do not place too clos.e with magnetic stripe or chip card OD card, bank car<ls, etc.) to avoid magnetic failure.
- Please keep the distance at least 20cm between implantable medical devices [pacemakers, implan1able cochlear, etc.) and the wireless charger: to avoid potential interference with the medical device.
- To tala! care of the children, to ensure that they won’t play the wireless charger as a toy. to avoid unnecessary accidents.