POWERQI FC67C Fast Wireless Charger User Manual
- June 5, 2024
- POWERQI
Table of Contents
POWERQI FC67C Fast Wireless Charger User Manual
Introduction
Thanks for choosing us! This is a smart phone wireless charger that allows you
enjoy the fun of digital products easily. Please kindly read the user manual
before using and keep it for future reference.
Connect to Power Adapter
- Connect the power adapter to socket.
- Connect adapter to the USB 2.0 interface, the other Type-C to pad.
- Connect to power supply, the blue indicator light will flash twice and turn off, then enter standby mode.
Note : Only QC 2.0 standard power adapter support this product’s quick charge function. You need to buy power adapter separately.
Charging Mode
- Connect to power supply, the blue indicator light will flash twice and turn off, then enter standby mode.
- Put a wireless charging phone on the device, the indicator light will turn on and keep blue shows start charging. The indicator light will turn off and enter standby mode when the phone removed from the device.
Specification:
Input : DC5V,2.0A DC9V,1.67A DC12V,1.5A
Output : 5W/7.5W/10W/15W NW .: 95g
Frequency : 115-205KHz
Dimensions : 90x90x15mm
Charging distance : 4mm
Conversion : 72%
NW .: 95g
Notes:
- Do not squeeze or collisions.
- Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage.
- Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
- Do not place too close with magnetic stripe or chip card (ID card, bank cards, etc.)to avoid magnetic failure.
- Please keep the distance at least 20cm between implantable medical devices(pacemakers, implantable cochlear, etc.)and the wireless charger, to avoid potential interference with the medical device.
- To take care of the children, to ensure that they won’ t play the wireless charger as a toy, to avoid unnecessary accidents.
The involved images are sketch maps, the final product as per the material subjects. Includes: wireless charger, Power cable, user’ s manual.
Product Color, Material & Finishing Specifications
Product Model| FC67C| Brand| | Part number|
3-608FC670690A0001
---|---|---|---|---|---
Product Type| | Description| /| Job No.|
Dimension| 90*65mm| Original Designer| 11±| Date| 2020.08.17
Scale| 1:01| Technology| 1289 g| Verifing|
Revision| .
1 0| Change description|
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.