Shenzhen Powerqi Technology LC01 Alarm Clock Wireless Charger User Manual
- June 6, 2024
- Shenzhen Powerqi Technology
Table of Contents
Product Colour, Material & Finishing Specifications
Product Model| LC03| Brand| | Job No.|
---|---|---|---|---|---
Product Type| | Description| /| Revision|
Dimension| 85*65mm| Original Designer| | Date| 7/7/2021
Scale| 1:01| Technology| 128g| Verifing| /
Alarm Clock
Wireless Charger
User Manual
User Manual
Thanks for using this product, this is an Alarm Clock Wireless Charger,
allowing users to enjoy the digital products’ wireless charging unlimited fun.
Please read this manual carefully and keep it properly for reference before
using the Alarm Clock Wireless Charger.
Connect to Power Adapter
- Connect the power adapter to the socket.
- Connect the adapter to the Type-C interface, the other Type-C to pad.
Note: This product works with Type-C to Type-C charging cable. Only QC 2.0or QC3.0 standard power adapter supports this product’s quick charge function. You need to buy a power adapter separately. Type-( to Type-C charging cable and power adapter need to buy separately.
Usage of Alarm Clock
Clock key: short press this button to view the date, time, long press 1
seconds 12/24 h/year/month/day/time Corresponding flicker and then press + / –
12/24 set h/year/month/day/time.
Alarm key: short press time, see have set a good alarm clock, long press 1
seconds to enter the alarm Settings State, enter the alarm state and then
press the alarm can be set up three groups of alarm.
Each alarm can be set separately.
+ button: time/year/month/day
– key: time/year/month/day
Reset button: restore to The original state.
After the alarm clock rang, tap the product shell, enter a state of “sleep”,
displays on the right side of the alarm icon are flashing, the interval of five
minutes, the alarm sounded again, five times to sleep. If you need to shut the
alarm, press the “alarm” button, the alarm icon still, waiting for the next
cycle.
- The machine should be installed button battery to save Settings time, button batteries need to purchase.
Charge the phone wirelessly
- Make sure the wireless charger dock connects to the power supply.
- Put the Qi-enabled smartphone properly on the transmitter and starts recharging.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Specification
Input: DC5V/2A,DC9V/1.67A,DC12V/1.5A
Output: 5W/7.5W/10W/15W
Frequency: 115-205KHZ
Dimensions: 115×115×30mm
Charging distance: ≤10mm
Conversion: ≥72%
NW.: 100g
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>