LEXON LR153 Mina Sunrise Alarm Clock User Manual
- June 14, 2024
- LEXON
Table of Contents
LEXON LR153 Mina Sunrise Alarm Clock
IN THE BOX
- 1x Mina Sunrise
- 1x USB Type-C charging cable
- 1x User manual
PRODUCT OVERVIEW
- Push activation light
- Lampshade
- Body lamp / Touch-sensitive surface
- Date
- Time
- Alarm time
- Alarm ON & Alarm sound ON
- Alarm ON & Sunrise mode ON
- Night mode ON
- Battery and charging indicator
- USB-C charging port
- button
- Power button
- Time setting button
- Alarm setting button
- + button
- Screen brightness button
- (A) Always ON display: Plug Mina Sunrise into a power source using the USB-C cable and a USB power adapter (not included).
- (B) Battery saving mode: When running on battery, the LED display will light ON for 5 seconds and then an additional 15 seconds at lower brightness. Touch the body lamp to wake up the screen.
TIME/DATE SETTING
- Press and hold the button to access the time & date setting interfaces.
- Press the -/+ buttons to adjust the settings.
- Press the button to validate.
- Alarm time setting only: Double press the button
- Turn OFF the alarm: Push down the top of the lampshade while ringing
- Snooze: Touch the body lamp to snooze for 6 minutes
- Enable/disable alarm mode: Press the button once. Repeat to turn it back ON
SCREEN BRIGHTNESS ADJUSTMENT
- Press and hold the button to access the brightness setting interfaces.
- Press the -/+ buttons to adjust the settings.
- Press the button to confirm.
SUNSET MODE
- Press and hold the top of the lampshade. Sunset mode will run for 30 minutes.
- Press the top of the lampshade once to disable the sunset mode.
NIGHT MODE
- This feature only works when the device is plugged in.
- The display goes into night mode (black screen) from 10:00 PM to 8:00 AM (touch body lamp to wake up display for 20 seconds)
- Press the button once to enable or disable the night mode.
LAMP FEATURES
- Turn ON the light: Push down the top of the lampshade
- Switch the light color: Push down on the top of the lampshade to toggle between the 9 light colors
- Adjust brightness: Press the – or/and + buttons
- Turn OFF the light: Wait 3 seconds then push down the top of the lampshade
SAFETY PRECAUTIONS
- Make sure to respect the technical specifications for charging and never use a power adapter delivering more voltage output than the one indicated to avoid any irreversible damage to the internal circuit (DC Input: 5V).
- Do not store your device in very hot or cold areas. It is recommended to use your device at room temperature.
- Do not expose your device to direct sunlight for an extended period of time.
- Do not attempt to service, repair, or disassemble the device by yourself.
PRODUCT SPECIFICATIONS
- Material: Aluminium/ABS
- Weight: 0.52 lb / 235 g
- Dimensions: © 4.33 x 4.33″ / D 11 x 11 cm
- Max lumen output: 70 Im
- Color temperature: 2800 – 6000K Max.
- Input port: DC 5V
- Battery type : 18650 lithium battery 2000 mAh
- Battery voltage: 3.7V
Normal usage time (If not plugged):
- Alarm with sound mode only: Up to 4 months
- Alarm with sunrise mode only: Up to 1 month
- Lamp (light function only): Up to 24 hours
- Battery life may vary depending on functions used, brightness, alarm settings, and other parameters.
- Charging system: USB Type-C
- Charging time (USB Type-C): approx. 5 hours
- Operating temperature : 0°C – +45°C
- International warranty: 1 year
EUROPEAN UNION CE DIRECTIVE
- LEXON hereby declares that the device follows the essential requirements and other relevant provisions of Directives 201453//EU & 201165//EU
- The original EU declaration of conformity may be found at: https://www.lexon-design.com/assets/certifications-ce-minasunrise.pdf
UK CONFORMITY ASSESSMENT
- The inlet at profusion he ked equalize Regula ois 01 Sit requirements and
- The original UK declaration of conformity may be found at: https://www.lexon-design.com/assets/certifications-ukca-minasunrise.pdf
FCC STATEMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Notice:
Any changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
RF exposure statements
- This equipment complies with FCC radiation exposure requirements set forth for an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance.
CANADA COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
- This Class B digital apparatus complies with Canadian ICES-003 & ICES-005.
RF exposure statements
- This device complies with the ISED RSS-102 RF exposure requirement set forth for an uncontrolled environment and is safe for intended operation as described in this manual.
- 123, Avenue des Champs-Elysées – 75008 Paris – FRANCE
- All brands or product names are or may be trademarks of their respective owners.
- Pictures and specifications are not contractual. Assembled in China.
- lexon-design.com ecodesign
- Scan to access the full user manual
Documents / Resources
|
LEXON LR153 Mina Sunrise Alarm
Clock
[pdf] User Manual
LR153, LR153 Mina Sunrise Alarm Clock, Mina Sunrise Alarm Clock, Sunrise Alarm
Clock, Alarm Clock, Clock
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>