MAIRDI M200 Single Ear Bluetooth Wireless Headset User Manual

June 14, 2024
MAIRDI

USER MANUAL

M200

Quick Start

Correct Wearing

Principle

MAIRDI M200 Single Ear Bluetooth Wireless Headset - correct
Wearing1

  1. Power On/Off
    MAIRDI M200 Single Ear Bluetooth Wireless Headset - power on
off

  2. Connect with Mobile Phone

a. After powered on, the headset willgo into pairing mode
Blue and red liht flashes altemately
Pairing
b Tumon the Buctooh funclion on mobile phone
Blue breath light flashes once every 10 seconds
Connected

  1.  Connect with Two Mobile Phones
    a. Tum offthe Blustooth function of the first mobile phone which was paired with “M200″ already.
    MAIRDI M200 Single Ear Bluetooth Wireless Headset - turn
off
    b, Tum on the second mobile’s Bluetooth function and search “M200° for paiing.
    MAIRDI M200 Single Ear Bluetooth Wireless Headset - turn
off1
    c. Turn on the first mobile’s Blustooth function. Search and Gonnect the *M200″ paired before.
    MAIRDI M200 Single Ear Bluetooth Wireless Headset - turn
off2

  2. Playing/ Pause
    MAIRDI M200 Single Ear Bluetooth Wireless Headset -
playing
    Short press once to pause
    Short press once again o play
    When playing music bive breath light flashes every 10 soconds

  3.  Next/ Last Song & Volume Adjustment / Mic Mute
    MAIRDI M200 Single Ear Bluetooth Wireless Headset - mic
mute
    Long press the “volume -* button 2ss to mute microphone during call.”Toot” tone will be heard every 10ss during ‘microphone muted.

  4. Call Management
    MAIRDI M200 Single Ear Bluetooth Wireless Headset - mic
mute1

| Answer/End call Short press once
---|---
| Reject call Long press 2ss
| Dial the last call Short press twice.
| Short press 1o end current call and meanwhile answer the new call
| Answer the second call Short press twice.
| Switch from the current call to the first call  Short press twice
| Long press 2ss to reject new call for continuing the current call

  When call s coming, red light flashes every 3 seconds
During call, blue light flashes every 10 seconds

  1. Voice Assistant

Available to wake up voice assistant by touch the mult-funciion button for 4ss when connected with cell phone

  1. Factory Reset
    MAIRDI M200 Single Ear Bluetooth Wireless Headset - factory
Reset

  2. Charging
    MAIRDI M200 Single Ear Bluetooth Wireless Headset - charging
cable

Use the supplied charge cable to charge the headphone

Red light falshes when battery low
Prompt tone “didi” every 10 seconds
Solid red light when charging, solid blue light when fully charged

Accessories
Headset……..1
Charge Cable……1
User Manual ……1
Silicone Earplugs……2
Velvet Bag ……….1

Specifications

Model No.: 11200
Bluetootn Version: 5.2
Bluetooth Protocol: AZDP, AVRCP, HFP. AAC, lc
Transmission Distance: 30m(uithout obstacie)
Weight 289
Audio Channe: Stereo
Spoaker Frequency: SOHZ-20KHZ
Sound Qualty: APTX-HDIno distrtion
Microphone: CVC.0
dual mic nise reduction technology
Standby: 200H
Music Time: 8H(70% volume)
Gharge Time: 1.5H
Gharge Votage: SVDC(<24V)
Battery Capaciy: 180mAh
Working Temperature: -10 C~60 C
Battery Charge Time: >1000
Waterproof Level: IP67

Note:

  1. The correct wearing positon of the bone conduction speaker of this headset is the cheek bone in front of the ear. Please do not put speaker nto ears.
  2. Listening to high volume music for long time may cause hearing loss. Please try to sten at moderate level volume.
  3.  Avoid dropping from high which causese damage 1o sound qualty. Keep away from fire and high voltage equipments.
  4.  Pleasa store the headset in a dry and ventiated place. When the headset is not used for along time, charge it every two months
  5. If the headset is stained wih water or sweat after exercising, please use a clean cloth 1o wipe it for long-term use.
  6.  Please reset the headset f it cannot work well
  7.  Please check the charging port before charging to make sure there are no water stains or foreign matters

Warranty Card

Customer Name| | Phone No.|
---|---|---|---
Product Name| | Product No.|
Customer Address| | Date of Purchase|
Dealer Name| | Phone No.|
Date of Repair| | Defective Status|
Repair Result|
Warranty Coverage

Button failure, no sound from speaker or microphone, call not work, unable to charge normally
Out of Warranty service
Damage caused by negligence.
Damage caused by unauthorized disassemble and modification.
Damage caused by charging with high voltage or manual abuse.
CHECK OUT CARD| Checker:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals