MAIRDI M890BT Headset with Microphone User Guide

**MAIRDI M890BT Headset with Microphone User Guide

**

Pairing Name: M890BT
Bluetooth Speification: V5.1, dual mode, downward compatible
Frequency Range: 2.4GHz-2.480GHz
Support Protocols: A2DP, AVRCP, HFP, AAC, etc Two Bluetooth devices can be connected at the same time
Transmission Distance: up to 30 meters (Transmission distance depends on the environment and Bluetooth device)
Maximum Talk Time: 20 hours
Standby Time: 200 hours
Working Temperature: 0 C to 45 C
Speaker:
Frequency: 20Hz-20KHz, Hi-fi
Distortion: ≤1%
Sound Channel:
Binaural: Stereo
Monaural: Mono
Microphone:
Microphone: Directional noise reduction microphone Acoustic Noise Canceling Structure Crystal clear sound and voice (DSP)
Headset Battery:
Type: Lithium-ion polymer
Battery Capacity: 320mAh
Charging Voltage: 5V DC
Life Time: Minimum recharging 1000 times
Operating Temperature: -10°C to +60 C
Charging Time: 2 hours
Charging Interface: Micro USB
Charging Base:
Net Weight: 115g
Headset Net Weight:
M890BT Mono 70g
M890BT Duo 95g

Button Function

Multi-functionButtonCall Switch

music
Mic Mute| Mic mute| Press the mute button to activate mic mute during a call, there will be “toot”every10 seconds while mute, repress the mute button to cancel mic mute
Minus Button| Volume down| Press the Minus button to decrease the speaker volume
Last song| Long press the Minus button to switch to last song when playing music
Multi-functionButton| Pause| Press the MFB button when playing music
Answer/end call| Press the MFB to answer/end mobile calls
Reject call| Press the MFB for 2 seconds to reject mobile calls. To reject the secondincoming call when on the first call, press the MFB and hold for 2 seconds.
When the headset is busy on the first call, quick press twicethe MFB to switch to the second call, the first call will holdand stay online. Quick press twice again to switch to the firstcall, the second call will hold and stay online.
Answer thesecond call| Press twice the MFB to answer the second incoming call andput the first call on hold.
End thesecond call| Quick press once the MFB to end current call and meanwhileswitch to another call. Press once again to end the secondcall.
Activate voiceassistant| In the state of no calling, press the MFB for 2 seconds toactivate voice assistant on mobile phone.

Prompt Tone Introduction

Headset Status

| Tone
---|---

Power on

| Power on

Power off

| Power off

Pairing Successfully

|

Connected

Battery Low|

“toot” every 5 minutes

Mic Mute|

“toot” every 10 seconds

Headset LED Indicators

Pairing with Bluetooth Device:

1. Be sure that your smart phone, laptop or desk phone has Bluetooth function.
2. Activate the Bluetooth function on your smart phone, laptop or desk phone.
3. Turn on your headset (slide switch to “ON”), you can hear prompt tone “power on”. The Led indicator will flash red and blue alternately, which indicates the headset is in pairing mode.
4. (If pairing fails, the headset will power off automatically after indicator flashes 10 mins, with prompt tone “power off” heard.)
5. Pair headset to your smart phone, laptop or desk phone.
6. Search Bluetooth device on your smart phone, laptop or desk phone.
7. Open “Bluetooth” menu and press “discover” or “add” to search M890BT on your smart phone, laptop or desk phone. 3) When M890BT shows on your Bluetooth devices list, please click it to start pairing. Prompt tone “connected” will be heard when pairing is successful, and the LED indicator will repeatedly flash blue every 5 seconds. 4) This headset can store devices ever paired in memory. When powered on, the headset will automatically connect to the first two devices in memory.

Function Introduction

1. Pair with 2 devices simultaneously M890BT can pair with 2 devices simultaneously.

2. Connect the first device with M890BT

3. Turn off the Bluetooth function of the first device

4. Connect the second device with M890BT

5. Turn on the first device’s Bluetooth function, then M890BT is paired with both devices.

6. Redial function Quick press the multi-function button twice to redial the last call.

7. One-touch play function Quick press the multi-function button once, the default music player of the mobile phone will play automatically (some mobile phones cannot implement this function).

8. Automatic re-connection function
   Bluetooth connection can be automatically re-connected if disconnected within 10 minutes in the effective distance. If reconnect fails, please turn off the headset and turn it on again to reconnect.

9. Mic mute function
   Long press the mute button to activate mic mute during a mobile call, repress the mute button to cancel mic mute. The tone “toot” will be heard every 10 seconds during mic mute status. The mic mute function may not be available on softphones in computers because the softphone systems limited.

10. Call switch

11. Press the MFB once to answer the first incoming call. Press twice to answer the second incoming call and put the first call on hold.

12. Quick press twice the MFB to switch to the first call, the second call will stay online

13. Quick press once the MFB to end the current call and meanwhile switch to another call, press once again to end the second call. 4) Press and hold the MFB for two seconds to reject the second incoming call when the headset is busy for the first call.

14. Activate voice assitant
    In the state of no calling, press the MFB for 2 seconds to activate voice assistant on mobile phone.

15. Reset Function
    Press and hold the plus and minus buttons simultaneously for 5 seconds, there will be prompt tone “toot, toot”. Pairing history record will be deleted when prompt tone” disconnected” heard.

Cautions

1. Most mobile phones will display headset power level on the screen. When headset battery is low, the headset will beep once in 5 minutes and the indicator will turn red. Please charge it in time.
2. Do not connect the full-charged headset to the charging circuit for a long time. Overcharging will shorten battery life.
3. Please keep the headset battery safe. Do not put the battery or the headset into fire or water to avoid explosion.
4. Do not use headset with high volume for extra long time, which may cause hearing loss. Always listen at a moderate level.
5. Don’t charge with high voltage device, which may cause damage to the headset. 6. Make sure that the headset is fully charged before using it if unused for a long time.
6. Lifetime of the battery will be significantly reduced if your device is left uncharged for a long time. We therefore recommend that you recharge your device at least once a year.
7. Please reset the headset if it cannot work well.

Product Warranty Card

Customer Name| | Date of Purchase|
---|---|---|---
Date of Purchase| | Product Model No.|
Problem Description:| | |
Microphone| Speaker| Battery| Buttons

Warranty:
Failure of headset buttons, speaker or microphone; charge unavailable.
Out of Warranty:

1. Ear cushions broken.
2. Fail to follow the user manual or disassemble the headset.
3. Incorrect connection with high voltage device for charging which causes earphone damage.
4. Artificial damage caused by impact, falling, water, pulling.

OQC CHECKING

|
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>