Mairdi M100V Bone Conduction Headphones With Microphone User Manual

June 13, 2024
MAIRDI

MAIRDI logo User Manual

M100V Bone Conduction Headphones With Microphone

M100V

Mairdi M100V Bone Conduction Headphones With Microphone -
fig1

Correct Wearing

Principle

Power On/Off

Mairdi M100V Bone Conduction Headphones With Microphone -
fig4

Connect with Mobile Phone

a. After powered on, the headset will go into pairing mode
 Blue and red light flashes alternately
 Pairing b. Turn on the Bluetooth function on mobile phone search M100.
 Blue breath light flashes once every 10 seconds
Connected

Connect with Two Mobile Phones

a. Turn off the Bluetooth function of the first mobile phone which paired with M100 already

Mairdi M100V Bone Conduction Headphones With Microphone -
fig7b. Turn on the second mobile’s Bluetooth function and search M100 for pairing

Mairdi M100V Bone Conduction Headphones With Microphone -
fig8

c. Turn on the first mobile’s Bluetooth function and search the M100 paired before

Mairdi M100V Bone Conduction Headphones With Microphone -
fig9Playing/ Pause

Short press once to pause
Short press once again to play
 When playing music blue breath light flashes every 10 seconds

Next/ Last Song & Volume Adjustment/Mic Mute

Mairdi M100V Bone Conduction Headphones With Microphone -
fig11

Long press the “volume -” button 2ss to mute microphone during call.”Toot” tone will be heard every lOss during microphone muted. Long press the same button 2ss again to un-mute microphone  Toot

Call Management

| Answer/End call Short press once
---|---
| Reject call ) Long press 2ss
| Dial the last call  Short press twice
| Short press to end current call and meanwhile answer the new call
| Answer the second call Short press twice
| Switch from the current call to the first call Short press twice

 When call is coming, red light flashes every 3 seconds
 During call, blue light flashes every 10 seconds

Voice Assistant

Mairdi M100V Bone Conduction Headphones With Microphone -
fig13

Available to wake up voice assistant by touch the multi-function button for 4ss when connected with cell phone (not in music mode). Pause music to wake up voice assistant if in music mode.

Factory Reset

Mairdi M100V Bone Conduction Headphones With Microphone -
fig14

 Blue and red light flashes alternately
 toot toot

Charging

Mairdi M100V Bone Conduction Headphones With Microphone -
fig15

 Red light falshes when battery low
 Prompt tone “didi” every 10 seconds
 Solid red light when charging, solid blue light when fully charged

Accessories

Headset 1
Charge Cable 1
User Manual 1
 Silicone Earplugs 2
Velvet Bag 1

Specifications

Model No.: M100
Bluetooth Version: 5.2
Bluetooth Protocol: A2DP, AVRCP, HFP, AAC, etc.
Transmission Distance: 30m(without obstacle)
Weight: 40g
Audio Channel: Stereo
Speaker Frequency: 50HZ-20KHZ
Sound Quality: APTX-HD/no distortion
Microphone: Ai dual mic noise reduction technology
Standby: 200H
Music Time: 8H(70% volume)
Charge Time: 1.5H
Charge Voltage: 5VDC≤24V)
Charge Port: Type-C USB
Battery Capacity: 180mAh
Working Temperature: -10C∼60C
Battery Charge Time: > 1000
Waterproof Level: IP67

Note:

  1. The correct wearing position of the bone conduction speaker of this headset is the cheek bone in front of the ear. Please do not put speaker into ears.
  2. Listening to high volume music for long time may cause hearing loss. Please try to listen at moderate level volume.
  3. Avoid dropping from high which causese damage to sound quality. Keep away from fire and high voltage equipments.
  4. Please store the headset in a dry and ventilated place, When the headset is not used for a long time, charge it every two months
  5. If the headset is stained with water or sweat after exercising, please use a clean cloth to wipe it for long-term use.
  6. Please reset the headset if it cannot work well.
  7. Please check the charging port before charging to make sure there are no water stains or foreign matters.

Warranty Card

Customer Name Phone No.
Product Name Product No.
Customer Address Date of Purchase
Dealer Name Phone No.
Date of Repair Defective Status

Repair Result

Warranty Coverage
Button failure, no sound from speaker or microphone, call not work, unable to charge normally
Out of Warranty service
Damage caused by negligence.
Damage caused by unauthorized disassemble and modification.
Damage caused by charging with high voltage or manual abuse.
CHECK OUT CARD I Checker:

MAIRDI logoMAIRDI M100R Wireless Bone Conduction Headphones - icon
8

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals