MAIRDI M100R Wireless Bone Conduction Headphones User Manual
- June 13, 2024
- MAIRDI
Table of Contents
M100R Wireless Bone Conduction Headphones
User Manual
M100R Wireless Bone Conduction Headphones
Quick Start
Correct Wearing
Principle
-
Power On/Off
-
Connect with Mobile Phone a. After powered on, the headset will go into pairing mode
Blue and red light flashes alternately
Pairing b. Turn on the Bluetooth function on mobile phone search M100.
Blue breath light flashes once every 10 seconds
Connected -
Connect with Two Mobile Phones
a. Turn off the Bluetooth function of the first mobile phone which paired with M100 already
b. Turn on the second mobile’s Bluetooth function and search M100
for pairing
c. Turn on
the first mobile’s Bluetooth function and search the M100 paired
before
-
Playing/ Pause
Short press once to pause
Short press once again to play
When playing music blue breath light flashes every 10 seconds -
Next/ Last Song & Volume Adjustment
-
Call Management
| Answer/End call Short press once
---|---
| Reject call ) Long press 2ss
| Dial the last call Short press twice
| Short press to end current call and meanwhile answer the new call
| Answer the second call Short press twice
| Switch from the current call to the first call Short press twice
When call is coming, red light flashes every 3 seconds
During call, blue light flashes every 10 seconds
-
Factory Reset
Blue and red light flashes
alternately
toot toot -
Charging
Red light falshes when battery low
Prompt tone “didi” every 10 seconds
Solid red light when charging, solid blue light when fully charged
Accessories
| Headset | 1 |
|---|---|
| Charge Cable | 1 |
| User Manual | 1 |
| Silicone Earplugs | 2 |
| Velvet Bag | 1 |
Specifications
| Model No.: | M100 |
|---|---|
| Bluetooth Version: | 5.2 |
| Bluetooth Protocol: | A2DP, AVRCP, HFP, AAC, etc. |
| Transmission Distance: | 30m(without obstacle) |
| Weight: | 38g |
| Audio Channel: | Stereo |
| Speaker Frequency: | 50HZ-20KHZ |
| Sound Quality: | APTX-HD/no distortion |
| Microphone: | Ai dual mic noise reduction technology |
| Standby: | 200H |
| Music Time: | 8H(70% volume) |
| Charge Time: | 1.5H |
| Charge Voltage: | 5VDC(524V) |
| Charge Port: | Type-C USB |
| Battery Capacity: | 180mAh |
| Working Temperature: | -10C-60C |
| Battery Charge Time: | > 1000 |
| Waterproof Level: | IP67 |
Note:
- The correct wearing position of the bone conduction speaker of this headset is the cheek bone in front of the ear. Please do not put speaker into ears.
- Listening to high volume music for long time may cause hearing loss. Please try to listen at moderate level volume.
- Avoid dropping from high which causese damage to sound quality. Keep away from fire and high voltage equipments.
- Please store the headset in a dry and ventilated place, When the headset is not used for a long time, charge it every two months
- If the headset is stained with water or sweat after exercising, please use a clean cloth to wipe it for long-term use.
- Please reset the headset if it cannot work well.
- Please check the charging port before charging to make sure there are no water stains or foreign matters.
Warranty Card
| Customer Name | Phone No. |
|---|---|
| Product Name | Product No. |
| Customer Address | Date of Purchase |
| Dealer Name | Phone No. |
| Date of Repair | Defective Status |
Repair Result
Warranty Coverage
Button failure, no sound from speaker or microphone, call not work, unable to
charge normally
Out of Warranty service
Damage caused by negligence.
Damage caused by unauthorized disassemble and modification.
Damage caused by charging with high voltage or manual abuse.
CHECK OUT CARD I Checker:
