LiGHTPRO 193S 12V JUNO 2 1.5W IP65 Outdoor-Garden Light User Manual
- June 9, 2024
- LiGHTPRO
Table of Contents
LiGHTPRO 193S 12V JUNO 2 1.5W IP65 Outdoor-Garden Light
Thank you for purchasing the Lightpro Juno. This document contains the
required information for correct, efficient and safe use of the product.
Consult the general manual of the Lightpro 12-volt system and the user manual
of your transformer for more information about the set up and connection of
your light plan.
Read the information in this manual carefully before using the product. Keep
this manual near the product for consultation in the future.
PRODUCT DESCRIPTION
The Lightpro Juno is a standing LED lamp for outdoor use. The fixture can be mounted on a solid surface or placed in the ground with the supplied spikes. This product may only be used as outdoor lighting in combination with the Lightpro 12-volt system. Any alterations made to the product may have consequences for the safety, guarantee and correct functioning of the product and/or other parts of the system.
SPECIFICATIONS
- Product Lightpro Juno 2 / 4
- Article number 193S / 194S
- Light source LED 2 / 4 W AC/DC 12V
- Power (max) 2 / 4 W
- Luminous flux (max) 192 / 372 lm
- Light colour 3.000K
- Average lifetime 25.000
- Dimensions (h x Ø) 85 x 55 x 68 mm
- Protection class IP65
- Ambient temperature -20°C to 50°C
- Cable length 2m
- Dimmable No
- Light source Not replaceable
- On/off 10.000
Packaging content
- Fixture Juno
- Baseplate
- Screw
- Screw
- Spike
- Screws
- Plugs
- Lightpro connector
- Hex key
Check if all parts are present in the packaging. For questions about parts, service, and any complaints or other remarks, you can always contact us. E-mail: info@lightpro.nl
INSTALLATION INSTRUCTION
Option 1: Placement on a fixed underground [Figure B]
Mount the base [2] on the surface with the included screw [6].
If necessary, drill a holes in the underground and use the included plug [7]. [Figure D]
- Attach the fixture [1] to the foot [2] with the screw [3].
- Set the fixture to the desired position.
- Fasten the screw [3] using the included hex key [9].
Ready
Option 2: Placement in the ground [Figure C] Mount the base [2] on the spike [5] with the included screw [4]. [Figure E]
- Attach the fixture [1] to the base [2] with the screw [3].
- Set the fixture to the desired position.
- Fasten the screw [3] using the included hex key [9].
[Figure G] Place the fixture in the ground.
UK Authorised Representative (for authorities only) ProductIP (UK) Ltd. 8, Northumberland Av. London WC2N 5BY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>