LEXON LA119 3 Wireless Bluetooth Speaker and FM Radio Instructions

June 14, 2024
LEXON

LEXON LA119 3 Wireless Bluetooth Speaker and FM Radio Instructions
LEXON LA119 3 Wireless Bluetooth Speaker and FM
Radio

Product Overview

Product Overview

  1. Tuning control
  2. Power switch /light status indicator
  3. Volume control
  4. BT/FM switch buttons
  5. Micro USB port
  6. Bluetooth® light indicator

Light Status indicator

Operation mode Bluetooth® light (6)
Power on and radio in playing state Steady Blue light
Power on and Bluetooth” mode in playing state Flashing Blue light (normal

flashing)
Device is in pairing mode| Flashing Blue light (fast flashing)
Charging state| Red light (If charging complete, red light will go off)

CHARGING

Connect USB charging cable to a USB charging source, plug the micro USB into (5). The red indicator (2) will be on when charging.
Charging time is about 4 hours. When the battery is fully charged, the red indicator light will go off.

RADIO SEARCHING

  1. Push the power switch to turn on the device.
  2. Select FM by pushing the FM band button.
  3. Tum the antenna clockwise or anti-clockwise unti the desired radio s clearly received
  4. Adjust the volume by pressing the Volume up (+) or down (-).

BLUETOOTH® PAIRING

  1. Push the power switch to turn on the device.
  2. Select Bluetooth® ( ) by pushing the Bluetooth” ( ) button.
  3. To notify you the speaker is in pairing mode, it will emit a sound and the light indicator will begin flashing rapidly.
  4. Go in the Bluetooth ® settings of your smartphone and ensure your Bluetooth® is switched on.
  5. Scroll to Other or new Devices and look for your new Bluetooth® speaker’s LEXON TYKHO 3
  6. Once it appears, tap it to connect. Your speaker will emit a confirmation sound as soon as it is paired.

Note: Once a Bluetooth® speaker is success fuly paired to your phone, it should automatically connect each time it’s powered on.

How to pair with another phone
To pair your speaker with another phone, please disconnect or forget LEXON TYKHO 3 from your smartphone’s Bluetooth® settings first.
Then, perform a new pairing procedure with another smartphone

PRODUCT SPECIFICATIONS

  • Lithium battery voltage: 3,7 V
  • Charging voltage: 5V
  • Lithium battery capacity: 2000 mAh
  • Battery life: 20 hours
  • Charging tibme: 4 hours
  • FM Frequency: 88-108 Mhz
  • Bluetooth®: BLE 5.0
  • Speaker Output: 3W x 1
  • Splash-proof
  • Material: Silicone / ABS
  • Input: Micro USB
  • Unit dimension: 140 x 45 x 140 mm

EUROPEAN UNION

CE DIRECTIVE

LEXON hereby declares that the device is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU & 2011/65/EU.” The original EU declaration of conformity may be found at: https://www.lexon-design.com/assets/certifications-ce-tykho3.pdf


UK Conformity Assessment

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: The original UK dedaration of conformity may be found at: https://www.lexondesign.com/assets /certifications-ukca-tykho3.pdf

DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies: electrical and electronic devices may not be dis-posed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

USA-FCC STATEMENT

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Notice:

Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instalation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

RF exposure statements
This equipment complies with FCC radiation exposure requirement set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.

CANADIAN COMPLIANCE STATEMENT

This device complies with Industry Canada license-exempt RSSS. Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

125, Avenue des Champs-Élysées – 75008 Paris – FRANCE All brands or product names are or may be trademarks or their respective owners. Pictures and specifications are not contractual. Assembled in China.
lexon-design.com

Symbols
Symbols

LEXON Logo

Documents / Resources

| LEXON LA119 3 Wireless Bluetooth Speaker and FM Radio [pdf] Instructions
B1S25XZKUJL, LA119, LA119 3 Wireless Bluetooth Speaker and FM Radio, LA119, 3 Wireless Bluetooth Speaker and FM Radio, Bluetooth Speaker and FM Radio, Speaker and FM Radio, FM Radio, Radio
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals