GL iNet RLLF5 Full Motion TV Wall Mount User Manual
- June 14, 2024
- GL iNet
Table of Contents
LARGE FULL-MOTION TV
WALL MOUNT
RLLF5 Full Motion TV Wall Mount
RLLF5
[email protected]
EN Safety Caution
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of
the installation, assembly or use of this product, please contact Customer
Service via [email protected]
.
- This product is designed for use in wood stud and solid concrete wall, -Do net mount on dry wall alone.
- Weight Restrictions: Do not exceed the maximum weight capacity of this product.
- The wall must be capable of supporting five times the weight of the TV and mount combined,
- Do not use this product for any purpose not explicitly specified by manufacture.
- Manufacture is not responsible for damage or injury caused by incorrect assembly or use.
Tools Needed
Hardware included
TV Screws/Washers
STEP 1 Attach Brackets to TV
STEP 1-1 Measure TV hole Patten Note: VESA=Horizontal x Vertical(Max
VESA:600 x 400 mm)
100mm = 4 in
200mm = 7 7/8 in
300mm = 11 3/4 in
400mm = 15 3/4 in
600mm = 23 5/8 in
STEP 1-2 Select TV Screws
STEP 1-3 Attach the Brackets
a.Flat – Panel TV(Screw and Washer)
b.Curved TV(Spacer,Screw and
Washer)
STEP 2 Attch Wall Plate to Wall
STEP 2A Wood Stud Installation
STEp 2B Soild Concrete wall Installations
Caution: These anchors are for solid concrete and concrete block walls
ONLY.
DO NOT use them in drywall or wood studs.
STEP 3 Extension Arms Assembly STEP 4 Hang and Secure TV to Wall
Plate
STEP 5 TV Leveling Adjustments (±3°)
STEP 6 Tilting angle adjustments (+15°~-15°)
Documents / Resources
| GL
iNet RLLF5 Full Motion TV Wall
Mount
[pdf] User Manual
RLLF5 Full Motion TV Wall Mount, RLLF5, Full Motion TV Wall Mount, Motion TV
Wall Mount, TV Wall Mount, Wall Mount, Mount
---|---