GL iNet S2000 Wireless VPN Encrypted Travel Router Instruction Manual
- October 30, 2023
- GL iNet
Table of Contents
GL iNet S2000 Wireless VPN Encrypted Travel Router Instruction Manual
Repair/ Reset
If you cannot access the web-based setup page or cannot connect to the router, you can press the Reset button:
-
Press and hold for 3 seconds and then release to repair your network.
The light will turn blue and flash slowly until your network recovers. -
Press and hold for 10 seconds, and then release to reset the router to factory settings. The light will turn blue and flash rapidly. All data will be cleared when the light becomes solid blue.
Technical Supports
- For more detailed and updated instructions, please visit our website docs.gl-inet.com
- For further questions, you can get help from the following ways:
-Email to [email protected]
-Message us on our Facebook: facebook.com/gl.inet.wifil
-Post questions in our forum: forum.gl-inet.com
-Ask professionals in other forums e.g. OpenWrt, LEDE or other professional websites
WARRANTY
-
We provide one year limited warranty for routers and 3-month limited warranty for accessories.
Extra warranty may apply according to the local law in which the product purchase took place. -
Highly recommend using the included 5V/2A power adapter.
-
Any damage to the router caused by not following the instructions will render this warranty null and void.
-
Any damage to the router caused by modifying the PCBA, components or case will render this warranty null and void.
-
Issues caused by the use of third-party firmware may not get official support from us.
-
Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in the water or on the ground will render this warranty null and void.
-
Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without further notice.
FCC ID: 2AFIW-S200
-
This device complies with Part 15 of the FCC Rules. Operation i! subject to the following two conditions:
(l)This device may not cause harmful interference, and
(2)Thisdevicemustecceptanyinterferencerecelved,includinginterferencethatmaycauseundesiredoperation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
-
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorientorrelocatethereceivingantenna.
-lncreasetheseparationbetweentheequipmentandreceiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help important announcement
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Hereby, GL TECHNOLOGIES (HONG KONG) LIMITED declares that the radio equipment type [Thread Border Router, GL-S200] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The fun text of the EU declaration of conformity is available et the following internet address: https://www.gl-inet.com/products/certificate
Caution:
This product uses WiFi 2.4GHz Operating Frequency is 2400-2483.SMHz.
Restriction Statement
The 5150-5250MHz/5725-5850MHz band is allocated for indoor use only.
Restriction in BE, BG, CH, CZ, DK, DE, EE, IE, EL, ES, FR. HR, IT, CY, LV, LT,
LU, HU, MT, NL, AT,PL, PT, RO, s~ SK, F~ SE, UK(NI).
The Product comply with Directive 2011/65/EU and its amendment directive
2015/863/EU (RoHS2.0)
Hong Kong Office
GL Technologies (Hong Kong) Limited
Unit 203, 2/F, Building 19W, 19 Science Park
West Avenue, Hong Kong Science Park,
Pak Shek Kok, N. T., Hong Kong
Shenzhen Office
Shenzhen Guanglianzhitong Tech Co., Ltd.
Room 305- 306, Skyworth Digital Building, Shiyan Street,
Baoan District, Shenzhen, China, 518000
( +86·0755·86606126)
ver 20220613