FS S5900-24S4T2Q Multi-Port Gigabit Ethernet Switch User Guide
- June 3, 2024
- FS
Table of Contents
S5900-24S4T2Q Multi-Port Gigabit Ethernet Switch
User Guide
Introduction
When new features are added or the original performance needs to be optimized and the currently running version is out of date, the device needs to be upgraded. In this case, you need to load a high version of the system software, upgrade through the CLI interface, WEB interface, and restart.
Upgrade by CLI Interface
Network Topology
Configuration Steps
1.1 Connection Equipment
Connect the switch to the public network through the management port as shown
in network topology, and configure the management IP address so that the
switch can communicate with the TFTP server and the PC.
1.2 Download the Configuration Software
After the connection is completed, there we recommend the super terminal,
putty or Secure CRT tool to configure the switch.
1.3 Switch on and Use Login Software
Power on the switch, open the login software installed, select the telnet
login mode, enter the switch’s management IP address, and connect to the
switch. (as shown below)
1.4 Log in to the switch
After completing the above steps, hitting the Enter key of the keyboard will
prompt you to enter the account password. At this time, enter the default username and password: admin/admin to log in to the s witch.
1.5 View the Current Version Information
View the current software version information by using CLI command.
S5900#show version
Fiberstore Co., Limited Internetwork Operating System Software
S5900-24S4T2Q Series Software, Version 2.2.0D Build 70424, RELEASE SOFTWARE
Copyright (c) 2018 by FS.COM All Rights Reserved
Compiled: 2020-1-10 15:1:2 by SYS, Image text-base: 0x108000
ROM: System Bootstrap, Version 0.4.5,hardware version:A
Serial num:CG1904033374N0029, ID num:20027002397
System image file is “flash:S5900.bin”
FS S5900-24S4T2Q RISC
2097152K bytes of memory,32768K bytes of flash
Base ethernet MAC Address: 64:9d:99:20:6c:4b
CPLD version:b1
snmp info:
vend_ID:52642 product_ID:335 system_ID:1.3.6.1.4.1.52642.1.335.0
S5900 uptime is 0:00:03:13, The current time: 2020-4-3 2:15:31
1.6 Configure TFTP Server
Place the software version file to the TFTP folder directory on the server, so
that the switch can read the software version file during TFTP downloading.
1.7 Download version file and upgrade version
CLI interface software upgrade is that the user selects the file to be
upgraded on TFTP and uploads it to the device for upgrade. After upgrade, the
system will automatically restart and load to the latest upgrade version.
S5900#copy tftp flash
Source file name[]?S5900-24S4T2Q_v2.2.0 66315.bin
Remote-server ip address[]?10.32.130.18
Destination file name[S5900-24S4T2Q_v2.2.0 66315.bin]?S5900.bin
#######################################################################################################################################
#################################
TFTP:successfully receive 22216 blocks, 11374495 bytes
S5900#config
S5900_config#boot system flash S5900.bin
S5900_config#quit
S5900#reboot
1.8 Restart for Verification
After the restart is complete, check the current device system running
version.
S5900#show version
Fiberstore Co., Limited Internetwork Operating System Software
S5900-24S4T2Q Series Software, Version 2.2.0D Build 66315, RELEASE SOFTWARE
Copyright (c) 2018 by FS.COM All Rights Reserved
Compiled: 2019-8-15 16:11:44 by SYS, Image text-base: 0x108000
ROM: System Bootstrap, Version 0.4.5,hardware version:A
Serial num:CG1904033374N0029, ID num:20027002397
System image file is “flash:S5900.bin”
FS S5900-24S4T2Q RISC
2097152K bytes of memory,32768K bytes of flash
Base ethernet MAC Address: 64:9d:99:20:6c:4b
CPLD version:b1 snmp info:
vend_ID:52642 product_ID:335 system_ID:1.3.6.1.4.1.52642.1.335.0
S5900-1 uptime is 0:00:05:10, The current time: 2020-4-3 2:34:34
Upgrade by WEB Interface
Configuration Steps
2.1 Configure the Switch to Log in with WEB Interface
Need to enter the CLI interface for WEB interface software, then open the
switch HTTP Server.
S5900#config
S5900_config#ip http server
2.2 Login in the WEB Interface
Configure the PC’s IP and the switch’s IP on the same network segment, enter
the management port IP address: 10.32.133.10 in the URL field of browser, and
then enter the default user name and password: admin / admin 
2.3 Upgrade the switch system file on the WEB Interface
After entering the switch WEB interface, select System Software> System
Software> Select the file, check the reboot line above, and restart
automatically after the upgrade. Click Upgrade.
2.4 View the current system version running on the WEB interface
htttp://www.fs.com
The information in this document is subject to change without notice. F5 has
made all efforts to ensure the accuracy of the information, but all
information In this document does not constitute any kind of warranty.