Luxceo P400 RGB Fill Light Stick Instruction Manual
- June 16, 2024
- Luxceo
Table of Contents
Luxceo P400 RGB Fill Light Stick
Product Information
Specifications
- Model : P400/P400S
- Revision Description : B C
- Color Model : CMYK (Cyan, Magenta, Yellow, Key/Black)
- Color Values : C0 M0 Y0 K100
Product Usage Instructions
Checking the Design Drawing
- To ensure accuracy, please keep the frame of the design drawing for reference. This will help in verifying the final product’s alignment and layout.
Providing Pantone Color
- If you require a specific Pantone color for your product, please provide the Pantone color code. This will help in achieving the desired color accuracy.
Date of Manual
- The manual was last updated on January 23, 2006.
FAQ
- Q: What is the difference between P400 and P400S models?
- A : The P400 and P400S models are different revisions of the same product. However, specific differences between them are notmentioned in the manual.
- Q: Can I use RGB colors instead of CMYK?
- A : The product uses CMYK color model. While RGB colors can be converted to CMYK, it is recommended to provide CMYK values directly for accurate color reproduction.
Thank you for choosing our products. Please read the user manual carefully before use and follow instructions to ensure proper use.
Product Features
- Versatile light, provides 36000 colors and 12 light effects.
- Easily adjust color temperature, intensity, hue and saturation.
- Mount on a tripod with the 1/4″ thread on the bottom on of the light.
- Built-in battery, used in more scenarios.
- Portable and easy to carry.
Packing List
- Light Fixture *1
- USB Charging Cable *1
- User Manual × 1
- Lanyard *1
- Remote Control *1
- Qualified Certificate ×1
Product Overview
- A. Light Cover
- B. Type-C Port
- C. Threaded Mount (1/4″ Thread)
- D. Display
- E. IR Receiver
- F. Lanyard Hole
- G. Aluminum Heatsink Housing
- H. Down Button
- I. Power Button
- J. Mode Button
- K. Up Button
- L. Arrow Button
Operation
- Power button : press and hold it to turn the light on/off
- Mode button : press it to switch among HIS, CCT, Scene modes.
- Arrow button : press it to select options under HIS, CCT Scenne modes.
- Up and down button : adjust the value.
Display and Charging Discription
- CCT Mode : press M button to select CCT, then press arrow button to choose from color temperature, brightness and turbo mode, adjust the value by “+” “” button (Turbo: press arrow buttton to select normal, then press by “*”,”” button to go into Turbo mode. Default CCT is median and brightness will go down if the temperature is toohigh).
- HIS Mode : press M button to select HSI, then press arrow button to choose from H, S, I and brightness, adjust the value by “*”, “-” button.
- Scene Mode : press M button to select Scene, then press arrow button to choose from light effect and brightness, adjust the value by “*” “” button. 12 special effect modes are as follows:
Strobe Mode
- Lightning
- Paparazzi
- Red SOS
- Warning Mode
- Police Car
- Ambulance
- Fire Truck
- RGB Mode
- Slow RGB Cycle
- Fast RGB Cycle
- Fireworks
- Scene Mode
- Sober Bar
- Disco
- Candle
- Charging Description: three are five bars of battery on the screen which indicate remaining battery charge in 20% incresement. When only one bar left and it keep flashing, it means that the battery is below 5% and need to recharge. A charging icon appears on screen during charging and five bars of battery will glow steady when it is fully charged. Charging time is approximately 2 hours.
Remote Operation
- The light can be controlled by IR remote (to preseve battery life, the remote won’t work when the light is turned off by power button)
- Effective remote control distance up to 7 meters. Make sure theremote point to receiver during use.
- Remove the battery insulation sheet before attempting to use the remote control.
- Remote control description is as follows:
P400 Specification
- Note : the light souce of fixture is not replaceable. Please replace the entire lamp when it reach end of life.
P400S Specification
- Note : the light souce of fixture is not replaceable. Please replace the entire lamp when it reach end of life.
PLEASE NOTE
- Keep the batteries away from fires and high temperatures.
- Do not place the light in fire in case of explosion.
- Do not modify or take this product apart. Don’t shake, beat or strike it.
- Please check the voltage requirements before using to avoid damage to the light.
- Children should use this product in the company of their guardians. To avoid eye injury, please do not look directly at the glowing surface.
- Please charge the light at least once every three months. And don’t put it into water or wet environment while charging.
- Please plug out the power cord while not using this light to avoid injury and damage, And long press to shut down.
- Please do not put it in damp environment or water when charging.
Customer Information
SHENZHEN DISCOVER TECHNOLOGY CO., LTD
- Add: 4F, 4B, Haomai High-tech Park 387 Huating Rd. Dalang St. Longhua District, Shenzhen 518109 China.
- Tel : 400-6618-101
- Web : www.luxceo.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>