Kruger Matz KM0224 LED tv Owner’s Manual
- June 4, 2024
- Kruger Matz
Table of Contents
Kruger Matz KM0224 LED tv
IMPORTANT SAFETY INSTRUCTION
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings, install in accordance with the instructions.
- Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and he point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lighting storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in anyway, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
- The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc.
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
- Attention should be drawn to the environmental aspects of battery disposal.
- The use of apparatus in moderate climate.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The symbol indicates that dangerous voltages constituting a risk of electric
shock are present within this unit.
The symbol indicates that there are important operating and maintenance
instructions in the Literature accompanying this unit.
Warning:
- High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.
- To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.
- Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
Caution :
- Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.
- Do not trap the power supply cord under the television receiver.
- Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall.
- Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it should fall.
- When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
INSTALLATION.
- Locate the TV in the room where light does not strike the screen directly.
- Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
- Allow enough space between the TV and the wall to permit ventilation.
- Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.
- Do not cover the ventilation openings when using the TV.
Minimum distances
Base stand assembly instruction
When you install the base, the need to face down flat on the TV platform.
Before installing (or removing) the stand, unplug the AC power cord from the
AC outlet before performing the operation, laying cushion in place the TV will
be placed to prevent damage to the TV.
-
Step 1
Locate the 2 pcs of bottom bracket into the gap on the back of the TV, and check that it is securely held in place as in illustration A) below.
-
Step 2
Lock the 2 pcs screws in the designated location as in illustration B) below. Check each screw is firmly tightened.
Warning:
Be sure to follow the instructions for installation, if the base is not
installed correctly, it may result in the TV falling over. To remove the
stand, perform the steps in reverse order, the base can not adjust the angle.
During the installation process, be careful to avoid damage to the TV and your
hand caught and ground to the bottom of the TV.
Mounting on a wall
IMPORTANT This operation requires two people! To ensure a safe installation, comply with the following safety instructions:
- Disconnect from power supply before mounting.
- Check that the wall can support the weight of the TV set and wall mount assembly.
- Follow the mounting instructions provided with the wall mount.
- The TV set must be installed on a vertical wall.
- Make sure to use only screws suitable for the material of the wall.
- Make sure that the TV set cables are placed in such a way that there is no danger of tripping over them.
- Mounting the TV set on the wall should be performed only by professionals.
BUTTONS ON THE TV SET
Note : The location, names and availability of the buttons may vary
according to the TV model. Please refer to the actual product.
-
* Press to turn on the TV set.- When ON: press to enter main menu or press and hold to display source list.
- MENU mode: press to return to the previous menu.
- Press and hold to turn off the TV set.
-
- Press to increase/decrease volume.
- MENU mode: right and left direction buttons (navigate the menu, adjust settings).
- Note! In some menus, VOLUME UP button performs a function of remote control OK button.
-
- TV mode: press to go to next/previous channel.
- MENU mode: up and down direction buttons (navigate the menu, adjust settings).
SOCKETS
Note: The location, names and availability of the sockets may vary
according to the TV model.
| Socket | Function |
|---|
RF input:
1x analogue DVB-T/T2/C| Connect with ground-based television with an antenna
cable. Connect plug of an antenna cable to the ANTENNA INPUT.
Headphones output (3,5 mm jack)| Connect headphones to the TV set.
CI+ slot| Technology that allows you to insert a CI module that allows your TV
set to receive scrambled TV channels.
HDMI input| Transmits video and audio data from external device such as DVD or
Blu-Ray player, video game console or PC (with compatible video card) to your
TV set with a HDMI cable.
USB input| Connect USB storage device.
AV composite input| Designed to transmit video and audio data from external
devices such as PVR, camera, DVD player, video game console to the TV set with
RCA cable.
SPDIF (Coaxial) output| Transmits audio data from the TV set to external
devices such as amplifier or speaker set with coaxial cable.
REMOTE CONTROL
Most of your television’s functions are available via the menus that appear on
the screen. The remote control supplied with your set can be used to navigate
through the menus and to configure all the general settings.
Note! The location, names and availability of the buttons on the remote
control may vary according to the TV model. Some buttons may not be available
on your remote control.
- : Switch the TV between on and standby mode
- : Switch the sound off/on
- Number key
- ECO : Select desired power saving mode
- EPG : Enter Electronic Program Guide
- VOL +/- : Increase/decrease volume
- SMART KEY: Enter additional functions menu
- CH +/- : Next/previous channel
- INFO: Display program information (if available)
- SOURCE: Display and select input source
- RETURN: Return to the previous menu
- MENU: Enter main menu
- EXIT: Exit the menu
- OK: Confirm an entry or selection
- : Use to navigate the menu and adjust options
- : Use to navigate the menu and adjust options
REC: No function- TIMESHIFT: No function
- TEXT: Display Teletext
- SUBTITLE: Display subtitle menu
- LIST: Display channel list
- FAV: Display favorite channel list
- Color buttons: Additional function
- Lang: Select audio language
BASIC OPERATION
- Connect the device to power supply socket.
- Connect the antenna cable into the appropriate RF input.
Switch the TV on and off
- When the TV is connected to power supply, it will be turned on directly or be in standby mode (power LED is on). If the TV is in standby mode, press the Power button to turn it on.
- To put the TV set into standby mode, press the Power button on the TV set or remote control. The TV set remains on, but with low energy consumption. To switch off the TV set, unplug it from power supply.
Note: For some models, press the Power button to switch off the TV set.
INITIAL SETUP
The first time you switch the TV set on, the Welcome screen appears, which
guides you through the initial setup process. Follow the on-screen
instructions to finish the initial setup process such as selecting the
language, scanning channels and more. During each step, either make a choice
or skip the step. If you skip a step, you can perform the setup later from the
settings menu.
LEARN MORE
For more information on this device visit: www.krugermatz.com. Visit
www.krugermatz.com website for more products and
accessories. In case of any doubts or questions reach out to our Frequently
Asked Questions section.
Dear Customer,
Hereby, Lechpol Electronics Sp. z o.o. Sp.k. declares that this device is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.lechpol.eu.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
Applicable in the European Union and other European countries with separate
collection systems This marking shown on the product or Its literature,
indicates that It should not be disposed with other household wastes at the
end of its working life. To prevent possible harm lo the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract This product should not be mixed with
other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1,
08-400 Miętne.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>