GL iNet GL-XE300 4G LTE Mobile Router User Guide
- June 4, 2024
- GL iNet
Table of Contents
GL iNet GL-XE300 4G LTE Mobile Router User Guide
Shipment Content:
1 x Protective Case
1 x 4G LTE Router
1 x USB-C Power Cable & Plug
2 x Retractable Ethernet Cable
1 x Short Ethernet Cable
1 x Mini Ethernet Switch
1 x Type B Micro USB
Quick Setup:
-
Plug in the Type C cable and turn On the router by holding the power button for 3 seconds. Allow 5 minute for the Wi-Fi LED to turn on. If the unit is charged it can be used unplugged for up to 4hrs. (Varies by usage)
-
Connect your Wired device (e.g., Ethernet enabled Printer, Laptop) Plug in one end of the Ethernet Cable to the router on the LAN port and the other end to you printer or laptop.
If you need to hardline more than one device skip to the next step.
-
(Optional) Connect your Wired devices via the Mini Switch. (e.g., Ethernet enabled Printer, Laptop) Plug in the Micro or Mini USB to the Mini Switch and the other end of the USB Type A to the router. This device allows you to connect to 4 wired devices via Ethernet.
Next , connect one of the Ethernet Cable’s ends to the router’s LAN port and the other end to Port 1 of the Mini Switch. Now you can connect the Ethernet cables to the Mini Switch Ports 2-5 and the other end to a Printer. -
Connect your Wireless devices (e.g., Tablet / PC) Search with your device for the SSID (Wireless Network Name), it is labeled the top of the router The password in your Important Documents Folder to connect wirelessly.
-
To connect to an Internet Hardline simply connect an RJ45 Ethernet cable from the Venue’s live port into the router WAN port. The router will prioritize the hardline over cellular data.
Troubleshooting:
What if…
Setup Video Guide:
Scan this QR code with your phone camera for video.
Contact our Support Team:
www.choose2rent.com/help
+1 800-622-6484 Ext. 3 (USA)