VALBERG VAL-FH20.2 Radiateur Heater Radiator Calefactor Instructions

: June 14, 2024
: VALBERG

Table of Contents

VAL-FH20.2 Radiateur Heater Radiator Calefactor
Parts
Specifications
Product usage
Operation
Cleaning and maintenance
WARRANTY CONDITIONS
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Heater
981336 – VAL-FH20.2
INSTRUCTIONS FOR USE

VAL-FH20.2 Radiateur Heater Radiator Calefactor

VALBERG VAL FH20 2 Radiateur Heater Radiator
Calefactor

Thank you!
Thank you for choosing this VALBERG product.
VALBERG products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won’t let you down.
We’re confident your new device will be a pleasure to use every day!
Welcome to ELECTRO DEPOT.

Parts

A Temperature dial – low to high heat
B Handle
C Power indicator light
D Power dial – select OFF/FAN/LOW/HIGH
E Air outlet vent
F Air inlet vent (on the back)
G Tip-over sensor (on the bottom)

Product overview

Unpack and remove all labels from the unit. Please check that all the product’s parts are included and intact. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.

Intended use

This product is for domestic use only. It has not been designed for industrial or professional use.
Any other use may damage the unit or cause injury.

Specifications

Model:	981336 – VAL-FH20.2
Operating voltage:	220-240V~,50-60Hz
Power:	Fan – 16 W

This product complies with the requirements imposed by directives 2014/35 / EC (repealing the Directive 73/23 / EEC as amended by Directive 93/68 / EEC) and 2014/30 / EC (repealing the Directive 89/336 / EEC).
Information requirements for electric local space heaters P
Model identifier(s): VAL-FH20.2

Item	Symbol	Value	Unit

Type of heat input, for electric storage local space heaters only (select one)

Manual thermal load control with a built-in thermostat	No
Manual thermal load control with room and/or outdoor temperature feedback	No
Electronic thermal load control with room and/or outdoor temperature feedback

No
Fan-assisted heat output| No
Type of heat output/room temperature control (select one)
Single-stage heat output with no room temperature control| No
Two or more manual states with no room temperature control| No
Room temperature control with a mechanical thermostat| Yes
With an electronic room temperature control| No
Electronic room temperature control and a daily programmer| No
Electronic room temperature control and a weekly programmer| No
Other control options (multiple selections possible)
Room temperature control with a presence detector| No
Room temperature control with an open-window sensor| No
With remote control option| No
With delayed start control| No
With a limited operating time| No
With a black globe sensor| No

Contact details:

ELECTRO DEPOT
1 route de Vendeville
59155 FACHES-THUMESNIL- FRANCE
Note:
For electric local space heaters, the measured seasonal space heating energy efficiency n= cannot be less than the declared nominal heat output value of the unit.

Product usage

Before using the product
WARNING!

Correctly connect the unit and do not leave it within the reach of unsupervised children.
It is normal for heaters to emit an odour and smoke when they are turned on for the first time or have not been used for a certain period of time. This will disappear after a short while.
The heater must always be placed in an upright position on a horizontal surface.
Place the heater on a stable, heat-resistant and non-combustible horizontal surface that is at least 30 cm (sides and rear) and 50 cm (front) clear of objects such as walls, furniture and curtains.
Never place the heater below electrical sockets.
The heater is suitable for use in a 10-15 m² space, such as a living room or office.
Do not use the heater in a bathroom or near to a swimming pool or other body of water.
The heater must never become wet. Do not use the heater in wet or humid conditions.
Direct the air outlet into the room so that the air can flow freely. Make sure the air inlets are unobstructed. Do not cover the heater’s air inlet or outlet vents/grilles.

Operation

Fully unwind the power cable.
Check the heater’s rating plate for the correct voltage. Connect the plug to a mains socket with a suitable voltage.
Turn the power dial to FAN (no heat, fan only), LOW heat or HIGH heat.
Turn the temperature dial clockwise towards the MAX mark until you hear a clicking sound, the power indicator lights up and the fan or heater starts to work. Turn the temperature dial up to increase the temperature when using the low or high heat mode.
Turn the temperature dial anticlockwise towards the MIN mark to decrease the heater temperature.
To turn the heater off, turn the temperature dial anticlockwise as far as it can go (MIN position) and turn the power dial to the OFF position. Unplug the unit from the mains socket.

NOTE: When turning the temperature dial up in LOW or HIGH heat mode, the power indicator will turn on and a click will sound to indicate that the thermostat is starting to work, and the desired function is activated. Similarly, when turning the temperature dial down in LOW or HIGH heat mode, the clicking sound will indicate that the thermostat has been turned off (the power indicator will also switch off) and the function has been deactivated.

Heater safety features

For safety reasons, this heater is equipped with a tip-over switch. This switch automatically shuts down the heater if it is not in an upright position while in operation. The heater will resume normal operation as soon as the heater is returned to its upright position.
The heater has a built-in overheating protection mechanism. A safety switch will turn off the power if the heater overheats (e.g. if the air inlet/outlet gratings are totally or partially blocked, the fan rotates slowly, or the fan motor stops). Turn the power dial to the OFF position and the temperature dial to the MIN position. Unplug the plug from the mains socket. Wait 30 minutes for the heater to cool down.
Remove the source of overheating (e.g. a blockage in the vent holes/grilles or excessive dust or dirt on the unit).
Turn the heater back on.

NOTE: If overheating continues or the unit repeatedly malfunctions, return theheater to an approved service centre.

Cleaning and maintenance

WARNING!

Before cleaning, always unplug the heater and allow it to cool down sufficiently.
Do not use flammable or abrasive detergents such as benzene or white spirit to clean the heater.
Never immerse the heater, power cable or plug in water.
Clean the exterior with a damp, soft cloth. Thoroughly dry the heater before using it again.
If you do not plan on using the heater for a long period of time, we recommend removing the feet and storing it in its original packaging in a cool, dry place, away from direct sunlight, excessive dust and dirt.

Storage

Always unplug the unit from the mains before storing it. Wait until the heater has cooled down before storing it.
Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

WARRANTY CONDITIONS

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase. This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear. proof of purchase required.

ELECTRO DEPOT
1 route de Vendeville
59155 FACHES-THUMESNIL – FRANCE
EN 50419 :2006 LOGO

Documents / Resources

| VALBERG VAL-FH20.2 Radiateur Heater Radiator Calefactor [pdf] Instructions
VAL-FH20.2 Radiateur Heater Radiator Calefactor, VAL-FH20.2, Radiateur Heater Radiator Calefactor, Heater Radiator Calefactor, Radiator Calefactor, Calefactor
---|---