CREATIVE EF1130 Outlier Free Mini Wireless Headphones User Guide

: June 15, 2024
: Creative

Table of Contents

CREATIVE EF1130 Outlier Free Mini Wireless Headphones
Product Information
Product Usage Instructions
Overview
LED Indicators
Multipoint Pairing
Charging Creative Outlier Free Mini
Master Reset
Controls
Technical Specifications
PRODUCT REGISTRATION AND WARRANTY
03-01, Singapore 609921. Telephone: +65 6895 4101 (standard international
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CREATIVE EF1130 Outlier Free Mini Wireless Headphones

Product Information

The Creative Outlier Free Mini is a wireless headphone model with the model number EF1130. It features LED indicators for various functions, such as low battery, charging status, Bluetooth pairing, and connection status. The headphones support multipoint connectivity, allowing you to connect to two mobile devices simultaneously. The headphones also have an omni-directional microphone, a magnetic charging port, and volume control buttons.

LED Indicators

Low Battery: Blinks red every 3 seconds
Charging: Solid red
Fully Charged: Solid blue
Bluetooth Pairing/Multipoint Connectivity: Solid blue alternating with red
Bluetooth Connection Established: Blinks blue once every 5 seconds, or blinks blue twice every 5 seconds

Master Reset
To initiate a Master Reset, enter Bluetooth pairing mode, then press and hold the Volume + and Volume – buttons for 5 seconds. The headphones will play a voice prompt of “Power Off” before powering off. The Master Reset is useful for resolving issues such as Bluetooth pairing failure, random LED blinking, or to reset all data.

Technical Specifications

For detailed technical specifications and other information, please visit creative.com/compliance/OutlierFreeMini.
For product support, visit creative.com/support/OutlierFreeMini.

Product Usage Instructions

Multipoint Pairing

Disconnect the headphones from the first mobile device. The headphones will automatically initiate Bluetooth pairing upon disconnection.
On the second mobile device, select the headphones again from the list of discovered devices to pair.
Upon successful pairing to the second mobile device, reconnect the first mobile device to the headphones to complete Multipoint Pairing.
Multipoint connection is established when the above steps are performed successfully and Bluetooth is turned on across both mobile devices.

Charging Creative Outlier Free Mini
Before charging, ensure that the magnetic charging cable is securely connected to the headphones’ magnetic charging port. Connect the other end of the cable to a power source. If the magnetic charging cable is not secured or connected incorrectly, remove the cable and reconnect it properly to prevent short circuiting.

Important: Keep the device and charging cable in a well-ventilated area, away from heat sources and other property, especially when charging. Unplug the charging cable from the power outlet or USB port when the battery is fully charged or when unused. Leaving it plugged in can risk damages to the battery and/or device.

Note:
The product usage instructions provided above are based on the information extracted from the user manual. For detailed instructions and safety information, please refer to the user manual or visit the provided links for support and compliance information.

Overview

LED Indicator
Omni-directional Microphone
Magnetic Charging Port
Volume + Button
Multifunction Button (Power On / Off, Play / Pause, Call / Bluetooth® Connection, Low Latency On / Off)
Volume – Button

LED Indicators

Multipoint Pairing

Disconnect the headphones from the first mobile device. The headphones will automatically initiate Bluetooth pairing upon disconnection
On the second mobile device, select the headphones again from the list of discovered devices to pair
Upon successful pairing to the second mobile device, reconnect the first mobile device to the headphones to complete Multipoint Pairing

Multipoint connection is established when the above steps are performed successfully and Bluetooth is turned on across both mobile devices.

Charging Creative Outlier Free Mini

Ensure that the magnetic charging cable is securely connected to the headphones’ magnetic charging port before connecting it to a power source to charge. If the magnetic charging cable is not secured or if it is connected incorrectly, remove the cable, and reconnect it to the headphones. It is essential for the headphones to be connected securely and properly to the charging cable to prevent short circuit when there is an active current.

WARNING:
Keep the device and charging cable in a well-ventilated area and away from heat sources and other property, especially when charging. Unplug the charging cable from the wall power outlet or USB port when the battery is fully charged or when unused. Leaving it plugged in risks damages to the battery and/or device.

Master Reset

To initiate a Master Reset, enter Bluetooth pairing mode, then press and hold the Volume + and Volume – buttons for 5 seconds. Upon completion, Ceative Outlier Free Mini will play a voice prompt of “Power Off” before powering off.
Master Reset is reserved for cases where users encounter issues while headphones are in use or during situations such as: Bluetooth pairing failure, random LED blinking, or to reset all data.

Controls

Powering On/Off
Manually Initiate Bluetooth Pairing Note:
Creative Outlier Free Mini will automatically initiate Bluetooth pairing after powering on. The headphones can only enter Bluetooth pairing mode when it’s powered off.
Playback Mode
Call Mode

Note:
Voice Assistant and Low Latency switch can only be triggered when no audio is playing.

Technical Specifications

Headphone Drivers: Bone Conduction Transducers
Frequency Response: 20–20,000 Hz
Microphones: Omni-directional x 1
Bluetooth Version: Bluetooth 5.3
Supported Bluetooth Profiles:
- A2DP (Advanced Audio Distribution Profile)
- AVRCP (Audio / Video Remote Control Profile)
- HFP (Hands-free Profile)
Audio Codec: SBC, AAC
Operating Frequency: 2402–2480 Hz
Operating Range: Up to 10m / 33 ft
Voice Assistant Support: Siri and Google Assistant
Playtime: Up to 6 Hours*
Charging Time: 2 Hours
Charging Interface: USB-A
Battery Type: Rechargeable Lithium-ion Polymer Battery 180 mAh 0.666 Wh
Input: 5V 1A
Operating Temperature: 0–45°C
Maximum RF Output Power: 4 dBm
IP Rating: IPX5

Based on moderate volume level. Actual battery life will vary with use, settings, songs, and environmental conditions

OTHER INFORMATION
Please visit creative.com/compliance/OutlierFreeMini for the user guide, safety and regulatory information and battery removal instruction, which is meant strictly for independently qualified professional. Please visit creative.com/support/OutlierFreeMini for all other support related to your product.

PRODUCT REGISTRATION AND WARRANTY

Registering your product ensures you receive the most appropriate service and product support available. You can register your product at creative.com/register. Please note that your warranty rights are not dependent on registration.

Creative warrants the included Creative-branded hardware product (the “Product”) against defects in materials and workmanship (“Defect(s)”) for twelve (12) months (for the European Union, twenty-four (24) months (excluding all wear and tear), subject to certain exceptions as stated in the EU Directive 1999/44/EC) from the date of purchase. The Creative Limited Hardware Warranty (the “Warranty”) does not cover (but not limited to) consumable parts, such as batteries or protective coatings that, due to their nature, tend to diminish over time; normal wear and tear, accidents or misuse. You must provide Creative proof of original purchase of the Product by a dated itemized receipt to be eligible for the Warranty. If a Defect arises and a valid claim is received during the applicable Warranty Period, Creative will at its sole option, service the Product at no charge using new or refurbished replacement parts at our sole discretion. Warranty benefits are in addition to rights provided under local consumer laws.

For Australia only:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. [Address: Creative Technology Ltd, 31 International Business Park,

03-01, Singapore 609921. Telephone: +65 6895 4101 (standard international

call charges apply.)]

For the full terms and detailed information on the Warranty, please visit creative.com/compliance/OutlierFreeMini, or scan the QR code.
A printed copy is available upon request to Creative Labs, Inc., 1900 McCarthy Boulevard, Suite 103, Milpitas, CA 95035.

Important Safety Instructions. Do not listen to audio on your earphones or headphones at high volume for prolonged periods of time as hearing loss may result.

Hereby, Creative Labs Pte. Ltd. declares the Bluetooth Headset, model no. EF1130 is in compliance with Directive 2014/53/EU and Radio Equipment Regulations 2017. The full text of the EU and UK declaration of conformity is available at http://www.creative.com/EUDoC.

The use of the WEEE Symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchase the product.

BATTERIES DIRECTIVE

FOR REMOVABLE BATTERY (Li-ion/polymer, button/coin cells, cylindrical cells)
This product contains one or more of the above removable batteries. The crossed-out wheeled bin symbol indicates that the battery in this product should not be treated as unsorted municipal waste upon reaching its end of life. Instead it should be taken to separate collection and recycling schemes. Batteries containing heavy metal content will have a two-letter symbol for the chemical under the crossed-out wheeled bin symbol. ‘Cd’ stands for cadmium, ‘Pb’ for lead, and ‘Hg’ for mercury. You can help the environment and avoid public health hazards by recycling the battery at an authorized recycling facility or the place of purchase. To find the nearest authorized recycle centre contact your local authority. Instructions for removing the battery can be found in the product user manual. The instructions should be followed carefully before attempting to remove the battery.

FOR INTEGRATED BATTERY
This product contains a Lithium ion/polymer battery that should only be removed by an authorized recycling centre. By recycling this product at your local authorized recycling centre or the place of purchase, the battery will be removed and recycled separately.

REGISTER YOUR PRODUCT
creative.com/register.

TECHNICAL SUPPORT
creative.com/support.

© 2023 Creative Technology Ltd. All rights reserved. Creative, the Creative Logo and Outlier are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. Siri is a trademark of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logo are owned by Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Actual product may differ slightly from images shown. Use of this product is subject to a limited warranty.