TOOLCRAFT AP-1000 LED Work Light User Manual

: June 15, 2024
: Toolcraft

TOOLCRAFT AP-1000 LED Work Light User Manual

Intended use

The product is an LED work light that can be powered via rechargeable battery pack or power adaptor.

Note:
Rechargeable battery packs, charger, and power adaptor are sold separately. For further information see section: Accessories [} 4].

If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

Delivery contents

Product
Operating instructions

Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Description of symbols

The following symbols are on the product/appliance or are used in the text:

The symbol warns of hazards that can lead to personal injury.

The symbol warns of dangerous voltage that can lead to personal injury by electric shock.

This product is constructed according to protection class III.

For safe and proper use, follow these instructions. Keep them for future reference.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

The product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

Handling

Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.

Operation

Consult an expert when in doubt about the operation, safety or connection of the product.
If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.

LED light

Do not look directly into the LED light!
Do not look into the beam directly or with optical instruments!

Mounting

When penetrating the surface (example: drilling or inserting fasteners), make sure no cables or pipes are damaged. Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock! Check for concealed wires and pipes before drilling or inserting fasteners.

Product overview

Light
Angle adjust lock
Carry handle
Rechargeable battery slot
Mode button
Power button
Power adaptor port
Frame / stand
Hanging hook
Wall mount bracket

Operation

Connect the product to a source of power (rechargeable battery pack or power adaptor).
Press the power button to switch the product ON.
Press the mode button to toggle through brightness levels:
L (low) → M (medium) → H (high).
Press the power button to switch the product OFF.

Cleaning

Important:

Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
Do not immerse the product in water.

Disconnect the product from the power supply.
Let the product cool down to ambient temperature.
Clean the product with a dry, fibre-free cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.

Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take back of waste. Conrad provides the following return options free of charge (more details on our website):

in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG.

End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

Product

This product contains a light source of energy efficiency class F.

Rechargeable battery slot. ………….. 20 V/DC Li-ion
DC input…………………………………… 22 V/DC, max. 1.5 A ø6.5 mm
Operating time ………………………….. using 4000 mAh rechargeable battery: approx. 10 hrs (low mode)
Power ……………………………………… low: 10 W, medium: 20 W, high: 30 W
Luminous flux (brightness) …………. low: 900 lm, medium: 1500 lm, high: 2480 lm
Colour temperature……………………. 6500 K (cool white)
Colour rendering index (Ra) ……….. >80
LED …………………………………………. 30 pcs SMD
Protection class ………………………… III
Operating / storage conditions…….. -5° to +40 °C, < 85 % RH (non- condensing)
Dimensions (L x W x H) ……………… 220 x 250 x 270 mm
Weight …………………………………….. 1.7 kg (without battery)

Accessories

Note:
This product is compatible with the following accessories (sold separately).

Rechargeable battery packs

Item No.:	Model No.:	Description
1881809	AP-1000	20 V/DC, 2000 mAh, 40 Wh
1881810	AP-1100	20 V/DC, 4000 mAh, 80 Wh

Battery charger

Item No.:	Model No.:	Description
1881811	ALG-1000	20 V/DC, 4600 mAh

QR Code

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2734751_V1_0623_dh_mh_en 886469515-2 I1/O1 en

TOOLCRAFT Logo