Rasonic RCM-F51WB Cordless Electric Spray Mop Instruction Manual

Rasonic RCM-F51WB Cordless Electric Spray Mop

Thank you for choosing Rasonic cordless electric spray mop. Read the operation manual carefully before use and keep it for your future reference.

Important Safeguards

When using the appliance, please follow the below safety precautions: The following chart indicates the degree of damage caused by wrong operation.

Warning : Indicates that may cause death or serious injury.

Caution : Indicates hazards that may cause human injuries or property damages

The following symbols can distinguish the instruction types that need to be strictly followed.

• These symbols mean prohibition
• These symbols mean requirement that must be followed.

| Never use the appliance when cleaning pads or disposal pads are not in

place, it is to avoid

|

| Do not put heavy objects on the power cord of the adaptor or

let it touch any hot

| Never use the appliance when cleaning pads or disposal pads are not in

place, it is to avoid

|

| Do not put heavy objects on the power cord of the adaptor or

let it touch any hot

| damage due to improper use.| | surface. Never clip, modify, stretch or twist the power cord of the

adaptor.

| Make sure to unplug the adaptor after fully charged. Charging for a long time may cause hazards such as rechargeable battery

overheat and burn.

|

| Remove the adaptor from socket and keep

the main switch in OFF position before cleaning appliance, installing or removing the

accessories

| Do not leave the appliance unattended while it is charging.| | Always hold the adaptor plug tightly with hands when insert or remove it. Do not grasp its

power cord.

| Do not place the appliance in a bookcase, built-in

cabinet or in another

| | Do not use the adaptor when its power cord is tangle.
| confined space. Ensure

the appliance is well ventilated.

| |
---|---|---|---

| To avoid danger, use the appliance only as described in the manual. Do not use outdoors or for other purposes than floor

cleaning.

| | Never use deficient or loosen power socket. Make sure the adaptor is dry before use and inserted firmly when use.

| Children shall not play with the appliance.

Using, cleaning and maintenance shall not be made by children without supervision. Put the appliance and its adaptor in a place not reachable by children or

pet.

| | The mopping head must be used with the provided rechargeable battery and charged with the provided adaptor. Otherwise, it may damage the appliance or cause danger.

| Never immerse the mopping head, handle, adaptor or its plug into water or let them wet, it is to avoid electric

shock.

| | To avoid electric shock, never assemble accessories, touch, plug or unplug the adaptor with wet hands.
---|---|---|---

| Do not attempt to modify the appliance by yourself or repair with any parts that are unauthorized, otherwise it may cause hazards and warranty becomes invalid.| | To avoid danger, never use and charge the appliance near the environment of:

–   Flammable materials, sprays and aerosols

–   Heat source (e.g. radiator), fire or expose under direct sunlight

–   Near water

–   Massive hot air, steam or humid area

| The appliance can be used by children aged

from 8 years and above and person with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the

hazards involved.

| | Always check the condition of the appliance and adaptor. To avoid hazards, please stop using immediately if any damage is found.

Please contact Shun Hing Electric Service Centre Limited for checking and repairing.

---|---|---|---

| To avoid the mopping head damage and danger, never use the unauthorized battery or

adaptor.

| | Only use the adapter supplied with the appliance to charge the battery.

Cleaning and Storage

It is recommended to clean the mopping head and cleaning pads regularly, otherwise if too much dusts accumulated, it may weaken the cleaning performance of the appliance

1. Unplug the appliance (turn the main switch of the mopping head to OFF position) and let it cool down before cleaning the appliance.
2. Main body cleaning: Do not rinse it with water. Use a damp cloth to clean the appliance surface. If it is too dirty, wipe it with a damp cloth with a little mild detergent, then wipe with damp cloth.
3. Mopping head cleaning: When the spindle at the back of the cleaning pads gets stuck by foreign objects, the safety protection device will be activated to suspend the operation. Recommended to use tweezer to help cleaning the objects.
4. Never use cleaning powder or harsh cleaning tools when cleaning. Do not use toxic and abrasive cleaners for cleaning.
5. After cleaning, let the appliance cool down completely before storage and put it in a box and store in a dry place.
6. Do not stand the wet cleaning pads on the floor for a long time, which may cause discoloration of the floor. If you want to store it upright, you can keep the lock catch locked on the mopping head and rest it on the water bucket for future use (Refer to “Chapter

Product Specifications

295 x 135 x 1120 mm

Net Weight (Approx.)

(Extension poles & handle installed)

| ****

1.2kg

The length of operation time can be varied depending on the temperature of the battery and other usage conditions

Product Descriptions

1. Mopping head
2. Upper extension pole (Left) & Lower extension pole (Right)
3. Handle
4. Adapter
5. Water bucket
6. Microfiber pad
7. Hoop & loop pad
8. Disposal pad

Accessories Assembly and Disassembly

Accessories Assembly

ATTENTION! Pay attention to the positions of upper and lower extension poles; otherwise, assembly may fail.

ATTENTION! Make sure all the components are well-installed. Do not pinch your fingers during assembly.

ATTENTION! When assembly, make sure the main switch is in OFF position.

Accessories Disassembly

ATTENTION! Do not forcibly pull out the connected parts if you do not press the button hard; otherwise, the appliance may damage. If possible, do not disassemble the handle, extension poles and mopping head usually.

Assembly and disassembly of cleaning pad

1. Align the center of one microfiber pad with the center of the mopping plate, press the pad down to attach, as shown in Fig. 1.
2. Make sure the microfiber pads are well-installed. If the pads do not attach to the mopping tray properly, it will affect the operation and reduce the operation time.
3. To use the disposal pads, you must attach the hoop & loop pads on the mopping plate first, then attach the disposal pads on it.

Operation Instructions

Application of water tank

The appliance is equipped with water spray function, helping to humidify the floor and assist in cleaning floor. To apply, fill clean water into the water tank of the mopping head before use. Steps are as follow,

1. Lift the water tank cover.
2. Make sure to use a measuring cup to fill water. (The water tank capacity is 150ml. DO NOT exceed the maximum water level.)
3. After filled, make sure to put back the cover to close the water inlet. If there is an overflow of water, wipe it immediately to avoid malfunction.

ATTENTION! Do not inject tap water directly to avoid malfunction.

ATTENTION! To deal with stain which is difficult to remove, you can add diluted neutral detergent into the water tank; use the detergent correctly and strictly follow the water and detergent ratio recommended to avoid blocking the nozzle.

Use of lock catch

The appliance is equipped with lock catch, which can make the product stand vertically on the floor. Put the appliance in a horizontal plate, move the handle forward to vertically erect the extension poles and then let the lock catch locked. To unlock, release the lock catch by holding the extension poles backward.

ATTENTION! Do not forcibly use the lock catch, as it may be destroyed and be cannot reused.

Instruction of use
According to “Chapter 5.1 Assembling the accessories”, assemble the handle, extension poles, mopping head and cleaning pads accordingly. Moisten the pads, and then operate the appliance as follow:

• Start the operation: Turn on the main switch at the back of the mopping head to ON position. Place the appliance on the ground to be cleaned, press the button once on the handle and the cleaning pads start to rotate. During operation, the indicator on the mopping head will be in blue while the LED on the front will be switched on too. In normal situation, you need not to add force when mopping; if necessary, press the button on the handle to spray water on the ground.
• End the operation: Once finished, press the button once to switch off the operation. Turn the main switch to OFF position at the same time.

ATTENTION!Pressing the extension poles hard may damage the appliance or cease the operation.
ATTENTION! After cleaning, if the main switch is not turned to OFF position for a long time, theappliance will crash and cause malfunction.
ATTENTION! Do not touch the cleaning pads when rotating; otherwise, you may be injured.
ATTENTION! The appliance must be used when the cleaning pads assembled; during operation,  objects that are likely to be damaged, falling, or entangled/ hooked by the cleaning pads (such as hemp rope or carpet, etc.) must be kept away from the appliance.

Use of water bucket
The appliance is equipped with a dedicated mop cleaning water bucket for cleaning the dirty pads. Moreover, the use of a drainage foot pedal design can easily drain waste water without staining your hands.

Construction of water bucket

1. Drainage foot pedal
2. Water bucket
3. Waste water tank
4. Handle
5. Water injection plate
6. Friction plate
7. Drainage hole
8. Overflow level

Clean and dry the cleaning pads

1. Fill water onto the water injection plate of the water bucket until nearly reach the overflow level.

2. As shown in Pic.1, put the appliance on the water bucket vertically.
   ATTENTION! Pay attention if the overflow outlets are blocked by foreign objects, which may lead to overflow. Keep the overflow outlets unblocked when use.

3. Put the appliance in inclined level as shown in Pic.2, and hold the handle firmly. Start the operation by pressing button. The pads will be cleaned by rotation. Suggested to clean the pads for 10-20 seconds.
   ATTENTION! Do not press the extension poles heavily, otherwise, safety protection will be activated and stop the operation.

4. After cleaning, switch off the appliance by pressing button once. Step on the drainage foot pedal repeatedly to discharge the sewage into the waste water tank.

5. After several time of drainage, certain sewage accumulated inside the waste water tank. Pour them out by holding the handle of the water bucket as shown in Pic.3.

Change of battery in handle

To operate and use the water spray function, you should install battery on the handle. Follow the below steps to install:

1. Take out the battery cover on the handle with a screwdriver.
2. Insert two AAA batteries as indicated.
3. Close the battery cover and tighten the screw with a screwdriver.

ATTENTION! Identify the positive and negative poles when install the batteries.

ATTENTION! During installation, take good care of small accessories to avoid losing them.

ATTENTION! If there is no operation or water spray after batteries installed, follow the steps above to re-install or replace the batteries.

Nozzle cleaning

Press and hold the button about 5-10 seconds to access the water spray function. Water will be sprayed steadily such to keep the nozzle head unblocked. If not, follow the instructions below to clean the nozzle,

• the nozzle head counter-clockwise to detach.
• As shown in Pic.2, block the inner part of the nozzle slightly by fingers. Press the button repeatedly to start water spraying. There will be water overflows between the inner part and your fingers. Repeat several times to discharge the blockage.
• After clearing, turn the nozzle head clockwise to put it back.

ATTENTION! Pay extra attention when install the small inner part. If the inner part is lost, the water spraying function may not work properly.

ATTENTION! When you hang the appliance to clean the walls, the water spray function will be disabled.

Charging

Be sure to fully charge the battery when used for the first time or when not used for a long time. (DO NOT operate the appliance when charging)

WARNING! The electricity supply must be 220V AC, and the adapter supplied must be used. It may cause malfunction or fire if the improper adapter is used to charge the appliance.

• Turn on the main switch to ON position, otherwise, the appliance cannot be charged.
• Insert the connector of the adapter into the charging jack of the mopping head, and the adapter head to the power socket
• When charging, the indicator on the mopping head will be in red. The indicator will be switched off when charging is completed.
• Unplug the adapter head from power socket when finish.

ATTENTION! Make sure to fully charge the appliance before the first time of use. ATTENTION! The adaptor and the appliance will become hot while charging, which is normal.

Troubleshooting

turned on

| Turn on the main switch to ON

position.

Check if the charging is

completed or not

| Recharge the appliance
Check if the batteries in the

handle is exhausted

| Replace    the    batteries    in    the

handle

Check if the cleaning pads get stuck by foreign objects| Refer to “ Chapter 2 Cleaning

and Storage” to clean the cleaning pads.

Check if there is any objects blocked the signal

transmission

| ****

Clear the objects in the extension poles.

Is it wrong adapter is used| Use the adapter supplied to

charge the appliance.

The water spray malfunction| No working sound on the mopping head when pressing

the button

| Change the batteries in the handle.
Check if there is sufficient

water in the water tank

| Make use of a measuring cup to

fill sufficient water.

Check if the nozzle blocked by foreign object.| Refer to “Chapter 6.6 Nozzle

cleaning” to remove the foreign object.

Check if the detergent added to the water tank is too sticky| Clear the water tank and the detergent inside.
Water leakage in

nozzle

| Small amount of drips after

operation

| Normal situation. Use damped

cloth to wipe.

| Non-stop water dripping| To clear the objects blocking the nozzle, keep pressing the button repeatedly.

If situation continues, refer to “Chapter 6.6 Nozzle cleaning” to

clean the nozzle.

Special Avowal

1. The content in the operation manual has been checked. Our company reserves the hermeneutic power to any printing errors or misunderstandings on the content.
2. If there are technical improvements on the appliance, the operation manual will be updated in new version without prior notice. The product appearance and specification are subject to the manufacturer’s information.
3. In case there is any inconsistency or conflict between the English version and the Chinese version of the terms, the Chinese version shall prevail.
4. The e-copy of user manual can be sent by email on request. For inquiries, please call Shun Hing Electric Works & Engineering Co., Ltd. hotline at 2861 2767.

After Sales Service

1. For any defect, in the judgment of the technician from Shun Hing Electric Service Center Limited, caused under normal use, our company is responsible for repairing any parts of the said electrical appliance free of charge within one year guarantee period commencing from the date of purchase. Any defective part which has been replaced shall become our property. Warranty service does not cover the repair or replacement of spare part consumable parts such as microfiber pads, hoop & loop pads, disposal pads, inner part, and water tank cover, etc. If the appliance is used improperly, for commercial use or semi-commercial use, or not following the instructions in the operation manual, the warranty becomes invalid and our company will refuse any liability and repairing cost for the damage caused.
2. User must present the official invoice/redemption voucher and the product warranty card with the chop from sales point/redemption center for maintenance. For inquiries, please call Shun Hing Electric Service Center Limited hotline at 2406 5666.

11/F, Shun Hing Centre, 2 Shing Yiu Street, Kwai Chung, N.T., H.K. Tel: 2406 5666 Fax: 2408 0316 Website: http://www.shesc.com/en

References

• 信興電工工程有限公司
• 預約維修 | 服務 | Shun Hing Electric Service Centre Ltd
• Shun Hing Electric Service Centre Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>