HARMAN HK GO+PLAY 3 Portable Bluetooth Speaker User Guide

HARMAN HK GO+PLAY 3 Portable Bluetooth Speaker User Guide

Product Information

Specifications

• Output power: FPO
• Frequency response: FPO
• Signal-to-noise ratio: 80 dB A-weighted
• Battery type: Rechargeable battery with USB charge-out
• Battery charge time: 3 hours
• Music play time: Up to 8 hours (dependent on volume level and audio content)
• Power supply: FPO
• USB port: Type C
• USB rating: 5V/2A (maximum)
• Dimensions: 439 x 240 x 192 mm / 17.3 x 9.5 x 7.6
• Weight: 4.9 kg (10.8 lbs.)

Product Usage Instructions

Bluetooth Pairing
To pair your device with the GO+PLAY 3:

1. Go to the Bluetooth settings on your device.
2. Select “HK Go + Play 3” from the list of available devices.
3. The speaker will be connected and ready for use.

Music Streaming
To stream music through the GO+PLAY 3:

• To play music, press the play button on your device or use the controls on the speaker.
• To pause or resume music playback, press the play/pause button on your device or the speaker.
• To adjust the volume, use the volume controls on your device or the speaker.

Multi-Point Connection
The GO+PLAY 3 supports multi-point connection, allowing you to connect up to 2 devices simultaneously. To connect multiple devices:

1. Connect the first device following the Bluetooth pairing instructions.
2. Once the first device is connected, follow the same pairing instructions to connect the second device.
3. The GO+PLAY 3 will now be connected to both devices.

Stereo Boost Pairing
To pair two GO+PLAY 3 speakers for stereo sound:

1. Press and hold the stereo boost pairing button on both speakers for more than 5 seconds.
2. The left speaker will indicate that it is ready to pair.
3. Press the stereo boost pairing button on the right speaker within 5 seconds.
4. The speakers will be paired and ready for stereo playback.

Stereo Boost Control
To control the stereo boost settings:

• To swap left and right channels, press the swap button on either speaker.
• To unpair the speakers, press and hold the unpair button on either speaker for more than 5 seconds.

Conferencing

The GO+PLAY 3 can be used for conferencing calls:

• When there is an incoming call, music playback will pause automatically.
• Pick up the phone call and speak into the microphone on the speaker.

Music Playback Through an Audio Cable
To play music through the GO+PLAY 3 using an audio cable:

1. Connect the audio cable to the speaker and your device.
2. Ensure that no music is playing through Bluetooth.
3. The speaker will start playing music through the audio cable.

Charging

To charge the GO+PLAY 3:

• Connect the power cord to the speaker and a power outlet.
• The speaker will indicate low battery when charging is required.
• The charging process will begin and the indicator will show that charging is in progress.

Battery Maintenance

If the speaker will not be used for a long period of time, it is recommended to recharge the battery at least once every 3 months. Battery life may vary depending on usage patterns and environmental conditions.

WHAT’S IN THE BOX

*Power cord quantity and plug type vary by regions.

BLUETOOTH PAIRING

MUSIC STREAMING

To reboot, press for more than 10 seconds.

MULTI-POINT CONNECTION

STEREO BOOST PAIRING

STEREO BOOST CONTROL

CONFERENCING

When there is an incoming call, music playback pauses. Pick up the phone call and talk through the microphone.

MUSIC PLAYBACK THROUGH AN AUDIO CABLE
After the audio cable is connected, ensure that no music plays through Bluetooth to start music playback through the audio cable.

CHARGING
If the speaker will not be used for a long period of time, please recharge the battery at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

FAQ

Q: How many devices can I connect to the GO+PLAY 3?
A: The GO+PLAY 3 supports a maximum of 2 devices for multi-point connection.

Q: Can I pair two GO+PLAY 3 speakers for stereo sound?
A: Yes, you can pair two GO+PLAY 3 speakers for stereo sound using the stereo boost pairing feature.

Q: How long does the battery last?
A: The battery can last up to 8 hours, depending on the volume level and audio content.

Q: What is the USB port for?
A: The USB port on the GO+PLAY 3 is for charging the speaker or for service purposes, depending on the version.

References

• Anatel — Agência Nacional de Telecomunicações

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>