Lordear SLF16007 Rain Shower Head Instruction Manual

Lordear SLF16007 Rain Shower Head

Essential Accessories List

Item No.| Product Name| QTY| Item No.| Product Name| QTY
---|---|---|---|---|---
1| Rain Shower Head| 1 PC| 6| Handle| 1 PC
2| Shower Arm| 1 PC| 7| Nails Bag| 1 BAG
3| Cover Board| 1 PC| 8| Allen-Key| 1PC
4| Valve Body| 1 PC| 9| Accessories bag| 1 BAG
5| Valve Body Cover| 1 PC| | |

WARNING: Choking hazard.Keep all small parts and plastic bags out of the reach of children.

Prepare the wall for installation.

( Note: The depth provided is for reference only. Please determine the installation depth based on the actual thickness of tiles.)

Tips :Distance from back of valve body to finish surface to be between 1.4-3.5 inches

Step 1: Install the valve body

Tips: Don’t remove the white protective cover when installing

• Mark position
  

• Drill hole

• Insert nylon plug

• Fix the valve body
  

Step 2: Connect the water pipes with valve body

Tips:Clean the water pipe to avoid any blockage, 1/2 inch male NPT fitting connection to be made with pipe thread sealant,do not over tighten.

Step 3 : Remove the protective cover

Step 4: Install the handle to test the water

Tips: Test the outlet of Rain shower head.

Step 5: Remove the handle,Install the white protective cover and finish the wall decoration

Tips: Install the white cover before finishing the wall so as to protect the embedded box

Step 6: Remove the white protective cover

Step 7: Put the valve body cover on and fix the handle

Step 8: Install shower arm and rain shower head

• Loose screw

• Take out the brass fitting

Clean and maintain product

1. How to clean the shower head :
   A. Rub the nozzles with fingers or toothbrush to loosen deposits,then run hot water for a while .
   B. Put the shower head in a pot,fill with enough white vinegar or Detergent to cover the shower head.Then soak it for 30 minutes or longer.
   C. Use a high quality microfiber cloth and gently wipe over the surface, then rinse with warm water.Finally,use a dry chamois or paper towel to gently remove any residue.

Warm Tips :
If you feel the flow is too small , you can take out the water restrictor accordingly.

|

Before

|

After

Guarantee Repairs Claims

1. During the warranty period, LORDEAR is responsible for free repairs of any defective products and missing parts.
2. Payment needed for replacement if the Malfunction and damage caused by following situations even within the warranty period:
3. Improper use, unauthorized repair or reconstruction (including throwing or beating);
4. Failure to follow installation manual (including unprofessional installation by a plumber) ;
5. Removal after installation or other factors;
6. Usage beyond the specified scope.
7. The recommended water temperature for the hand shower and rain shower head is ≤42°C, with a water pressure of 0.1-0.3 Mpa. The highest suggested temperature should not exceed 70°C, with a water pressure of 0.05-0.5 Mpa. Therefore,it is advised to keep any product equipped with a shower away from the heater to avoid potential risks.

Customer Support

THANK YOU FOR SHOPPING WITH US!

PLEASE DO NOT RETRUN TO STORE!
PLEASE CHECK ALL THE ACCESSORIES BEFEOR INSTALLATION.

Tips: If there is any questions for the products, please feel free to contact us.We will solve it at the first time.

For quick and better to solve problem for you, Required information is a MUST：

1. Where you buy
2. PO Number/Tracking number
3. SKU Number
4. Problem to Clarify
5. Picture/Video

Email:[email protected]
Tel: (+1)7053009828

www.lordear.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>