DIGITUS DS-40133 Digital To Analog Audio Converter User Manual
- June 13, 2024
- DIGITUS
Table of Contents
DIGITUS DS-40133 Digital To Analog Audio Converter
Digital to Analog Audio Converter
- Thank you for purchasing this Audio Converter. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference
Introduction
- The converter converts your digital audio signal (coaxial or optical TOSLINK input) into an analog signal (cinch stereo output).
- This conversion allows you to connect your modern digital audio devices from your television, media player, or DVD/Blu-ray player to your analog stereo system.
- Compact metal housing can let you place this converter anywhere and provides excellent shielding.
Features
- Convert a digital coaxial or TOSLINK audio signal into an analog stereo signal
- Connect your new devices with your analog stereo system
- Inputs: 1 coaxial / 1 optical TOSLINK
- Output: 1 cinch stereo
- Excellent signal quality due to an integrated noise filter that prevents humming and static
- Metal housing for perfect shielding
- Low power consumption of max. 0.5 W
- Sampling rates: 32, 44.1, 48, and 96 kHz
- Power supply included (5 V/1 A)
- Color: Black
Package Content
- Digital to Analog Converter
- 5V DC Power Supply
- User Manual
Panel Description
Digital to Analog Audio Converter
Signal Input/ Output
Input Audio format| Digital Audio
Output Audio format| Analog Audio
Audio Connector
Input Audio Connector| 1 x Toslink, 1 x RCA(coaxial)
Output Audio Connector| 2 x RCA(R/L)
Sampling Rate| 32,44.1,48 and 96KHz
Mechanical
Size(L-W-H)| 51x41x26MM
Wight(Net)| 78g
Environmental
Operating Temperature| 0°C to 70°C
Operating Humidity| 10% to 85% RH (no condensation)
Storage Temperature| -10°C to +80°C
Storage Humidity| 5% to 90% RH (no condensation)
Power Requirement
External Power Supply| 5V DC@1A
Power Consumption| 0.5 Watts (max)
Regulatory Approval| CE,FCC
Note: Specification is subject to change without notice.
Connection and Operation
- Before installation, please make sure all devices you wish to connect have been turned off.
- Connect the audio source device to the Converter with the appropriate Toslink or Coaxial cable
- Connect the AN Receivers or Amplifiers to the Converter with the appropriate R/L cinch cable
- Insert the DC plug of the 5V power supply into the converter and then connect the power adapter to the power outlet
- Attention: Insert/ Extract cable gently
Connection Diagram
- Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD), and Directive 2011/65/EU for RoHS compliance.
- The complete declaration of conformity can be requested by post under the manufacturer’s address.
Warning:
- This device is a class B product. This equipment may cause some radio interference in the living environment.
- In this case, the user can be requested to undertake appropriate measures to prevent interference.
- www.assmann.com Assmann Electronic GmbH Auf dem Schi.iffel 3
- 58513 Li.idenscheid Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>