DIGITUS DS-55520 4K HDBaseT HDMI Extender Set Installation Guide
- June 3, 2024
- DIGITUS
Table of Contents
DIGITUS DS-55520 4K HDBaseT HDMI Extender Set
Introduction
The HDBaseT™ HDMI Extender Set extends Full HD AV signals over a distance of up to 70 m, 4K/30Hz signals can be extended over a distance of up to 40 m using a CAT6 (or higher) network cable. Thanks to PoC (Power over Cable), only one unit needs to be supplied with power by an external power adapter. Bi- directional IR transmission and RS232 signal transmission are also included as features.
Features
- Supports HDBaseT™ 1.0 via CAT5e/6/7/8 cable up to 70 m
- Supports 4K2K/30Hz (24 bit)
- Maximum transmission distance (UHD 4K/30Hz, CAT6 or higher): 40 m
- Maximum transmission distance (Full HD, 1080p, CAT6 or higher): 70 m
- PoC (Power over Cable) – Only the unit requires an external power adapter
- Bi-directional IR signal transmission
- Bi-directional RS232 signal transmission
- HDCP 2.2 / 1.4
- Video bandwidth: 10.2 Gbps
- Transmitter unit connections:
- 1x HDMI input (4K/30Hz) – Connection signal source
- 1x RJ45 (HDBaseT™) output – Connection CAT transmission cable
- 1x IR input to receive remote control signals
- 1x IR output for control of the source device
- 1x RS232 (3-pin Phoenix) for RS232 command transmission
- 1x Power adapter input (DC 24V/1A), screw connector -Connection for external power adapter
- Receiver unit connections:
- 1x HDMI output (4K/30Hz) – Connection output device
- 1x RJ45 input (HDBaseT™) – Connection CAT transmission cable 1x IR input to receive remote control signals
- 1x IR output for control of the source device
- 1x RS232 (3-pin Phoenix) for RS232 command transmission 1x Power adapter input (DC 24V/1A), screw connector -Connection for external power adapter
- Suitable for wall mounting
- ESD protection
- Operating temperature: 0-40°
- Power consumption: approx. 20W max.
- Housing: Metal
- Dimensions (1 unit): L 6.5 x W 11.5 x H 1.7 cm
- Weight (1 unit): 200 g
- Color: black
Package Contents
- 1x 4K HDBaseT™ HDMI® Extender Set
- 1x Power Cord
- 1x Manual
Specifications
Technical
Frequency
Bandwidth
| 297MHz[10.2Gbps]
Transmitter
Input/output
| 1x HDMI Female port/1xCAT6 1x IR
Tx/1x IR Rx/1xPhoenix
Receiver
Input/output Ports
| 1xHDMI Female port/1xCAT6 1x IR Tx/1x
IR Rx/1xPhoenix
Power Supply| DC 24V 1A
ESD Protection
| Human Body Model: ± 8kV
(air-gap discharge) ± 4kV (contact discharge)
---|---
Dimensions (mm)| 65(W) X 115 (D) X 17 (H)
Weight| 200g x 2
Operating
Temperature
| 0°C ~ 40°C / 32°F ~ 104°F
Storage
Temperature
| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (Non-condensing)
Power Consumption| 20W (Max)
Operation controls and Functions
Transmitter
1| POWER| This LED illuminates when the device is
connected with power supply.
---|---|---
2| DC 24V| Plug the 24V DC power supply into the unit.
3
|
HD BaseT OUT
| Standard HD BaseT signal output port. Connect HD BaseT receiver with a UTP cable following the standard of direct
interconnection method.
4| HDMI IN| HDMI input port. This slot is where you
connect the HDMI source.
---|---|---
5| IR IN| Channel 2 IR Receiver. Connect with
Wideband IR Rx.
6| IR OUT| Channel 1 IR Transmitter. Connect with
Wideband IR Tx.
7| RS232| Phoenix jack provide Serial port control
signal from receiver or to receiver.
8
|
Connection Signal Indicator Lamp
| Ÿ Illuminate: The Transmitter and Receiver are in good connections status.
Ÿ Flashing: The Transmitter and Receiver are in poor connections status.
Ÿ Dark: The Transmitter and Receiver are
not connected.
9
| Data Signal Indicator
Lamp
| Ÿ Illuminate: The HDMI signal with HDCP.
Ÿ Flashing: The HDMI signal without HDCP.
Ÿ Dark: No HDMI signal.
Receiver
1| POWER| This LED illuminates when the device is
connected with power supply
---|---|---
2| DC 24V| Plug the 24V DC power supply into the unit.
3
|
HD BaseT IN
| Standard HD BaseT signal input port. Connect HD BaseT transmitter with a UTP cable following the standard of direct
interconnection method.
---|---|---
4
|
HDMI OUT
| HDMI output port. This slot is where you connect the HDTV or monitor with HDMI
cable.
5| IR IN| Channel 1 IR Receiver. Connect with
Wideband IR Rx.
6| IR OUT| Channel 2 IR Transmitter. Connect with
Wideband IR Tx.
7| RS232| Phoenix jack provide Serial port control
signal from receiver or to receiver.
8
|
Connection Signal Indicator Lamp
| Ÿ Illuminate: The Transmitter and Receiver are in good connections status.
Ÿ Flashing: The Transmitter and Receiver are in poor connections status.
Ÿ Dark: The Transmitter and Receiver are
not connected.
9
| Data Signal Indicator
Lamp
| Ÿ Illuminate: The HDMI signal with HDCP.
Ÿ Flashing: The HDMI signal without HDCP.
Ÿ Dark: No HDMI signal.
Description 1
POC (Power over Cable) Application Example
Description 2
Bidirectional Infrared control Application Example
Description 3
Bidirectional RS232 control Application Example
Application Example
| 1 | DVD or Blu-ray Player | 5 | IR RX |
|---|---|---|---|
| 2 | Power Supply | 6 | IR TX |
| 3 | TV | 7 | RS-232 Equipped HDMI |
Matrix
4| RS-232 Equipped PC or
Notebook
| |
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH Auf dem Schüffel 3
58513 Lüdenscheid, Germany
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>