SONY RMF-TX920U Voice Remote Control User Manual
- June 1, 2024
- Sony
Table of Contents
SONY RMF-TX920U Voice Remote Control
Product Information
Specifications:
- Operating Temperature : -10°C to 45°C
- Battery Type : Lithium Battery
Product Usage Instructions
Controlling Your TV (English)
- Press the Power key to turn on the TV.
- Press and hold the [VOL(-)] key and [Google Assistant] key for 2 seconds to initiate pairing with the TV.
- All pairing transactions are behind the scenes, and no setup is required.
Control del televisor (Spanish)
- Pulse la tecla de encendido para encender el televisor.
- Mantenga presionado [VOL(-)] y la tecla [Google Assistant] durante 2 segundos para iniciar el emparejamiento con el TV.
Caution
Please read these safety instructions to ensure your personal safety and prevent property damage.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Refer all servicing to qualified service personnel.
FAQ
- Q: What should I do if the remote control is not working?
- A : If the remote control is not working, try replacing the batteries with new ones. Ensure there are no obstructions between the remote and the TV sensor. If issues persist, contact customer support.
- Q: Can I pair the remote with multiple TVs?
- A: The remote can be paired with one TV at a time. To pair with a different TV, follow the pairing instructions provided in the manual.
CONTROLLING YOUR TV
- Press the Power key to turn on the TV.
- Press and hold the [VOL(-)] key and [Google Assistant with TV.
- All parking transactions is behind the scenes and no setup is required. ] key for 2 seconds to initiate pairing
Control del televisor (Spanish)
- Pulse la tecla de encendido para encender el televisor .
- Mantenga presionado [VOL(-)] y la tecla [Google Assistant ] durante 2 segundos iniciar el emparejamiento con TV.
- Todas las transacciones de pelado está detrás de la escena y no se requiere ninguna configuración.
Controlando a sua TV (Portuguese)
- Pressione a tecla de alimentação para ligar a TV.
- Pressione e segure [VOL (-) ] e chave [Google Assistant ] durante 2 segundos iniciar o emparelhamento com TV.
- Todas as transações apara está por trás da cena e nenhuma configuração é necessária.
Caution
Please read these safety instructions to ensure our personal safety and prevent property damage
Warning
- Do not put the remote in a fire
- Do not disassemble the remote control
- Disposal of the remote control
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
warning that batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Important Safety Instruction
- Read this instruction
- Keep this instruction
- Head all warning
- Follow all instructions
- Do not use this apparatus near water
- 6. Clean only with dry cloth
- Do not install near any heat source such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacture
- Refer all servicing to qualified service personnel. Service is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, dose not operate normally, or has been dropped.
Specification
- Operating Temperature: -10 degree – 45 degree
- Battery Type : Lithium Battery
COMPLIANCE WITH FCC RULES AND REGULATIONS
15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase or decrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced remote control/ TV technician for help.
This equipment has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user’s authority to operate this equipment.
FCC RF Radiation Exposure Statement:
To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Authorization Label
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning Statement:
Europe-EU Declaration of Conformity and Restrictions
Hereby, SONY declares that this Voice Remote Control is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. This equipment is marked with the symbol and can be used throughout the European community. This indicates compliance with the RE Directive 2014/53/EU and meets the relevant parts of the following technical specifications:
- EN300328 v2.2.2 : 2019
- EN301489-1 v2.2.3 : 2019 / -17 v3.2.4:2020
- EN62368-1 :2020+A11:2000
- EN62479: 2010 / EN50663: 2017
- EN55032: 2015+A11: 2020 / EN55035: 2017+ A11:2020
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
Product Specification :
- Software : X1
- Frequency : 2402 to 2480 MHz
- Maximum power : 7dBm
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>