GENMAX GM6000IED CO Sensor User Manual
- June 9, 2024
- GENMAX
Table of Contents
GENMAX GM6000IED CO Sensor
Tooling Introduction
Hand tools are also can use:
- Cross screwdriver
- 7mm sleeve
- Special 3mm anti-theft screwdriver
Removing the panel rear cover
Take out the inverter
Open the CO alarm
Install CO alarm
Assembling the CO Alarm
Install the inverter
Install the inverter
Install the panel rear cover
Install the panel rear cover
Start-CO Alarm Self-Test
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>